Inclination sensors

Mobile controllersControllers and softwareStarter setEasy system introduction.Wired hardware components.Integrated simulator for analogueand digital signals.Two CAN interfaces to test allCAN / gateway functions.Programming system, examplesand documentation on CD-ROM.R360 starter setComplete set for learning and testing.If you have no experience with programming via CoDe-Sys, the R360 starter set gives you an easy and convenientintroduction to the R360 controller hardware andto the different CoDeSys programming languages. Thepackage contains all the required hardware components– from the controller, power supply to the completecable harness with integrated simulator for input andoutput signals. The required programming software,documentation and other tools are contained on theenclosed CD. The printed brief instructions allow easyand successful introduction to the first project with theR360 starter set.But the starter set also offers many advantages for theexperienced programmer. Program parts can be developed,tested and optimised without much input irrespectiveof the overall application. The CAN interfacesbrought out from the cable harness enable developmentand optimisation of network programs.Connectors and splitter boxesType Description Orderno.Spring terminal boxEC2032Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Mobile controllersClassic-ControllerExtended-ControllerSmart-ControllerSafety-ControllerCabinet-ControllerCoDeSyssoftwareand toolsStarter setControllersandsoftwarePage36 - 3940 - 4142 - 4344 - 4546 - 4748 - 4950 - 5150