Inclination sensors

I/O modulesI/O moduleswith CANopen interfaceCabinetModuleInputs for digital and joystick signals.Usable as a controller for cockpitor operating panels.Central plug system for quickintegration into the cable harness.CAN interface withCANopen protocol.e1 type approval of the GermanFederal Office for Motor Traffic.CabinetModuleFor space-saving mounting.For large mobile machines cabins for operators are oftenused. In the environment around the driver's workplacemany signals, e.g. from switches, joysticks and signalindicators are generated. To ensure a low-cost connectionof these signals to the process controller, they arecollected at a central point and transferred via the CANbus to the process controller. The wiring complexity isconsiderably reduced.The CabinetModules have been developed just for thisapplication. Their flat design enables integration indashboards and operating panels. To connect switches,joysticks or signal indictors all important potentials arebrought out to the connectors. This eliminates the needof further terminals. Due to the parameter setting of theinput and output functions the modules can be flexiblyadapted to their application.Connectors and splitter boxesType Description Orderno.Plug set for CR2012 / CR2014Plug set for CR2016Cable with connectorAMP 6-pole, wired, 1.2 mCable with connectorAMP 10-pole, wired, 1.2 mCable with connectorAMP 14-pole, wired, 1.2 mCable with connectorAMP 18-pole, wired, 1.2 mEC2053EC2089EC1520EC1521EC1522EC1523Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129I/O modulesCompact-ModulemetalSmart-ModuleCabinet-ModuleKeypad-ModuleI/O moduleswithCANopeninterfacePage60 - 6162 - 6364 - 6566 - 6764