Inclination sensors

More documents

Recommendations

Info

Mobile controllersControllers and softwareSystem descriptionClassicControllerThe ClassicController is the basic device of the R360 controller family. Thefirst generation was a universal platform for a wide range of applicationswith its numerous configurable inputs and outputs.The latest generation of this controller is available in two types, they enableimplementation of many device variants due to their flexible configuration.The great advantage: storage at the OEM and for service on site is considerablyreduced.The ClassicController is available as 16-bit variant with 24 or 40 inputs andoutputs and as 32-bit variant with 32 multifunctional inputs and outputs.The function is defined in the user program.ExtendedControllerLike the ClassicController, the ExtendedController supports the various functionsof the configurable inputs / outputs and interfaces. In one housing itprovides up to 80 inputs / outputs, connection is made via two 55-way connectors.Depending on the selected mode the ExtendedController can be used withsimple or dual CPU function. As default, 80 inputs / outputs are available. Allfunctions are managed by the central CPU and programmed via a user programto IEC 61131-3.In the “dual CPU” mode the user can access two separately programmablecontrollers with 40 inputs / outputs each. But the internal synchronised datainterface still enables easy exchange between separately running processors.High flexibilityfor a wide rangeof applications:The Classic-Controller.SmartControllerThe SmartController performs different control functions. Programmable toIEC 61131-3 like all controllers of the ecomat moble system, it can be adaptedto different requirements. Whether it serves as an intelligent slave in adistributed system, as gateway between different CAN systems (SAE J 1939 /CANopen) or as controller for small stand-alone machines, the SmartControllerperforms all tasks. In this device it is also possible to set the parametersof the input and output function via the user program.SafetyControllerThe ClassicController for safety-related appliations up to the safety category 3(EN 954-1) is called SafetyController. In this device special test routines forhardware and software monitoring are implemented. Nevertheless, the controllersare easily and conveniently programmable via CoDeSys. Due to thecertification of the hardware, operating system software and programmingtools it is easy for the project engineer to get the approval for the machine.Full concentration can be given to the application program.feedback signalsBasic device structurein controllersup to the safetycategory 3.signalgeneratorcontrolelectronicsdecouplingmachinecontrolelectronicsVisit our website: www.ifm.com30
Controllers and softwareCabinetControllerThe CabinetController is suitable for signal processing, in particular in operatingpanels. To connect the switches, <strong>sensors</strong> and actuators the importantpotentials are available at the device connectors. No further terminals areneeded. The flat design enables integration in dashboards and operatingpanels. The CabinetController is also used in control cabinets of small standalonemachines. Free programming via CoDeSys enables evaluation and processingof the signals directly where they are provided.GeneralinformationList of articlesFor installation indashboards andoperating panels:The CabinetController.MobilecontrollersI/O-modulesDialoguemodulesConfigurabilityAnalogue inputsThe analogue inputs can be configured via the user program. They can beused as 0/4...20 mA current inputs and as voltage inputs. In the functionvoltage input the measuring range 0...10 V or 0...32 V can be selected. If theoperating mode 0...32 V is selected it is possible to read back the systemsupply voltage. This allows the measurement to be performed ratiometrically.Potentiometers or joysticks can then be evaluated without additionalreference voltage. Supply voltage fluctuations have no influence on themeasured value. As an alternative, an analogue channel can also be evaluatedas a digital input.U BBlock diagramof the analogueinputs.Diagnosisand serviceSensorsfor mobileapplicationsSignalconvertersConnectiontechnologyAccessoriesanalogue inputreferencevoltageTechnicalinformationand customerserviceEMCfiltervoltagecurrent measurementvoltage measurement0… 10/32 VVisit our website: www.ifm.com31
Page 1 and 2: Control systemsfor mobile vehiclesC
Page 3: General informationNotes and explan
Page 6 and 7: General informationNotes and explan
Page 23 and 24: List of articlesOrder numbersin alp
Page 25: Order numbersin alphanumeric orderO
Page 28 and 29: Mobile controllersControllers and s
Page 53 and 54: I/O modulesTechnicalinformationand
Page 55 and 56: I/O moduleswith CANopen interfaceCo
Page 57 and 58: I/O moduleswith CANopen interfaceCa
Page 59 and 60: I/O moduleswith CANopen interfaceTe
Page 61 and 62: I/O moduleswith CANopen interfaceCo
Page 63 and 64: I/O moduleswith CANopen interfaceSm
Page 65 and 66: I/O moduleswith CANopen interfaceCa
Page 67: I/O moduleswith CANopen interfaceKe
Page 70 and 71: Dialogue modulesDisplays, input mod
Page 80 and 81:
Dialogue modulesDisplays, input mod
Page 82 and 83:
Page 84 and 85:
Page 87 and 88:
Diagnosis and serviceTechnicalinfor
Page 89 and 90:
Remote maintenance anddata memory,
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Remote maintenanceand data memoryCA
Page 97 and 98:
Remote maintenanceand data memoryCA
Page 99:
CAN interfaceand CAN diagnosisCANvi
Page 102 and 103:
Sensors formobile applicationsIncli
Page 104 and 105:
Sensors formobile applicationsInduc
Page 106 and 107:
Sensors formobile applicationsPress
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Sensors formobile applicationsPress
Page 121 and 122:
Signal convertersGeneralinformation
Page 123 and 124:
Frequency, currentand voltage conve
Page 125 and 126:
Page 127:
Page 130 and 131:
Connection technologyM12 connectors
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 139 and 140:
AccessoriesList of articlesGenerali
Page 141 and 142:
Accessories for control systemsIllu
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Accessories for control systemsTech
Page 151 and 152:
Page 153:
Technicalinformationand customerser
Page 156 and 157:
Technical informationand customer s
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
I/O modules1 type CR ....3969232272
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212:
visit our website:www.ifm.comOvervi
show all

Inclination sensors

Create successful ePaper yourself

Delete template?

Save as template?