Inclination sensors

I/O modulesI/O moduleswith CANopen interfaceSystem descriptionSmartModules – devices with central plug for the cable harnessThe functions of the devices from the SmartModule family can be comparedto the devices from the CompactModule series. The difference however isthe mechanical design. By means of a central plug they can be directly integratedinto the cable harnesses of mobile machines and vehicles.These modules also offer high flexibility for the input and output configuration.The user can define the inputs to be analogue or digital. For theCR2513 the function of the analogue inputs can be additionally definedthrough parameter setting. Configuration is done from the user program viathe object directory. The analogue channels can be used as 0/4...20 mAcurrent inputs and as voltage inputs. In the function voltage input the measuringrange 0...10 V or 0...32 V can be selected. If the operating mode0...32 V is selected it is possible to read back the system supply voltage. Thisallows the measurement to be performed ratiometrically. Potentiometers orjoysticks can then be evaluated without additional reference voltage. Supplyvoltage fluctuations have no influence on the measured value. The outputscan be used as digital and PWM outputs. The modules CR2511 and CR2512also provide a current control for the direct triggering of hydraulic valves.The preset current value is transferred to the modules by the controller via aPDO. They monitor the preset value and regulate it if necessary. The CANnetwork is relieved of this task.For sensors and actuators all required connection pins are provided on thecentral plug: supply voltage, ground connection or signal inputs or outputs.If no cable harness is used, the prewired 55-pole connection cables can beused. For higher requirements a sealed version is available.The Smart-Modules areincorporated inthe same robustmetal housingas the mobilecontrollers.Standardconnection cable.Sealedconnection cable.Visit our website: www.ifm.com56