Inclination sensors

Mobile controllersControllers and softwareClassicControllerInputs for analogue, digital,diagnostic and pulse signals.Digital, PWM or current-controlledoutputs, H-bridge function.Freely programmableto IEC 61131-3.4 gateway interfaces, protocols forCANopen, SAE J 1939, ISO 11992.e1 type approval of the GermanFederal Office for Motor Traffic.ClassicController 32 bitRobust controller for mobile useThe ClassicController has been specially developed foruse in vehicles and mobile machines. Many years ofexperience with the development and construction ofmobile controllers have been applied to the new devicegeneration.The user can select the requested function of the inputsand outputs through parameter setting. Thus the samecontroller module can be used for different requirements.This reduces storage. In addition to the flexibleI/O level each controller module is equipped with fourCAN interfaces. A freely programmable CAN gatewaycan be implemented for coupling different networks. Itsupports all important bus protocols. This enables aneasy exchange of SAE J 1939 engine and CANopendata. Different transmission rates and the transparent orpreprocessing exchange of data between the networksare supported. The user can easily integrate all functionsin the application program via programming to IEC61131-3.Connectors and splitter boxesType Description Orderno.Connector AMP 55-polewirable, with contactsConnector wiredcable length 2.5 mConnector wiredcable length 1.2 mCable with connectorcores sealed individually, 1.2 mProgramming software CoDeSys+ tools, GermanProgramming software CoDeSys+ tools, EnglishEC2013EC2046EC2086EC2084CP9006CP9008Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Mobile controllersClassic-ControllerExtended-ControllerSmart-ControllerSafety-ControllerCabinet-ControllerCoDeSyssoftwareand toolsStarter setControllersandsoftwarePage36 - 3940 - 4142 - 4344 - 4546 - 4748 - 4950 - 5138