Inclination sensors

Mobile controllersControllers and softwareSafetyControllerSafety controller to IEC 61508 /EN 13849 safety category 3.Extended monitoring and testroutines for hardware and software.Freely programmableto IEC 61131-3.CAN interface with CANopenand CANopen safety protocol.e1 type approval of the GermanFederal Office for Motor Traffic.R360 SafetyController 16 bitSafety-related controllerFor control tasks with increased safety requirements theSafetyController R360 is available. Due to its integratedhardware and software function applications toIEC 61508 / EN 13849 can be controlled and monitored.Permanent checks of the CPU, memory and other hardwareby the operating system and extended diagnosticfunctions of the outputs enable a continuous monitoringof the control process. All important system informationfor the application program can be found in theeasy and clear programming system CoDeSys to IEC61131-3. Software tools enable safe and reliable loadingof the approved software for the machine productionas well.Via the CAN interface and CANopen protocol the SafetyControllercan be connected to further non safetyrelatedcontrollers or input / output modules of theR360 device family.Connectors and splitter boxesType Description Orderno.Connector AMP 55-polewirable, with contactsConnector wiredcable length 2.5 mConnector wiredcable length 1.2 mCable with connectorcores sealed individually, 1.2 mProgramming software CoDeSys+ tools, GermanProgramming software CoDeSys+ tools, EnglishEC2013EC2046EC2086EC2084CP9006CP9008Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Mobile controllersClassic-ControllerExtended-ControllerSmart-ControllerSafety-ControllerCabinet-ControllerCoDeSyssoftwareand toolsStarter setControllersandsoftwarePage36 - 3940 - 4142 - 4344 - 4546 - 4748 - 4950 - 5144