Inclination sensors

Mobile controllersControllers and softwareSystem descriptionClassicControllerThe ClassicController is the basic device of the R360 controller family. Thefirst generation was a universal platform for a wide range of applicationswith its numerous configurable inputs and outputs.The latest generation of this controller is available in two types, they enableimplementation of many device variants due to their flexible configuration.The great advantage: storage at the OEM and for service on site is considerablyreduced.The ClassicController is available as 16-bit variant with 24 or 40 inputs andoutputs and as 32-bit variant with 32 multifunctional inputs and outputs.The function is defined in the user program.ExtendedControllerLike the ClassicController, the ExtendedController supports the various functionsof the configurable inputs / outputs and interfaces. In one housing itprovides up to 80 inputs / outputs, connection is made via two 55-way connectors.Depending on the selected mode the ExtendedController can be used withsimple or dual CPU function. As default, 80 inputs / outputs are available. Allfunctions are managed by the central CPU and programmed via a user programto IEC 61131-3.In the “dual CPU” mode the user can access two separately programmablecontrollers with 40 inputs / outputs each. But the internal synchronised datainterface still enables easy exchange between separately running processors.High flexibilityfor a wide rangeof applications:The Classic-Controller.SmartControllerThe SmartController performs different control functions. Programmable toIEC 61131-3 like all controllers of the ecomat moble system, it can be adaptedto different requirements. Whether it serves as an intelligent slave in adistributed system, as gateway between different CAN systems (SAE J 1939 /CANopen) or as controller for small stand-alone machines, the SmartControllerperforms all tasks. In this device it is also possible to set the parametersof the input and output function via the user program.SafetyControllerThe ClassicController for safety-related appliations up to the safety category 3(EN 954-1) is called SafetyController. In this device special test routines forhardware and software monitoring are implemented. Nevertheless, the controllersare easily and conveniently programmable via CoDeSys. Due to thecertification of the hardware, operating system software and programmingtools it is easy for the project engineer to get the approval for the machine.Full concentration can be given to the application program.feedback signalsBasic device structurein controllersup to the safetycategory 3.signalgeneratorcontrolelectronicsdecouplingmachinecontrolelectronicsVisit our website: www.ifm.com30