Inclination sensors

Mobile controllersControllers and softwareSmartControllerUsable as intelligent I/O moduleor CANopen master.Gateway functions,CANopen, SAE J 1939.Configurable I/O functions.Freely programmableto IEC 61131-3.e1 type approval of the GermanFederal Office for Motor Traffic.SmartController 16 bitUniversal controllerIn small machines or applications where preprocessingof signals and data is required compact and very powerfulcontroller modules are used. The SmartControllerR360 has the required features. Depending on the configurationit can fulfil the different requirements.It can therefore be used as a compact controller. Theintegrated CANopen interface enables a flexible andpowerful extension of the system with further intelligentand standard I/O modules.If the two CAN interfaces are used, a freely programmableCAN gateway for coupling different networks isavailable which supports all important bus protocols.This enables an easy exchange of SAE J 1939 engine andCANopen data. Different transmission rates and thetransparent or preprocessing exchange of data betweennetworks are supported.Connectors and splitter boxesType Description Orderno.Connector AMP 55-polewirable, with contactsConnector wiredcable length 2.5 mConnector wiredcable length 1.2 mCable with connectorcores sealed individually, 1.2 mProgramming software CoDeSys+ tools, GermanProgramming software CoDeSys+ tools, EnglishEC2013EC2046EC2086EC2084CP9006CP9008Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Mobile controllersClassic-ControllerExtended-ControllerSmart-ControllerSafety-ControllerCabinet-ControllerCoDeSyssoftwareand toolsStarter setControllersandsoftwarePage36 - 3940 - 4142 - 4344 - 4546 - 4748 - 4950 - 5142