Inclination sensors

Signal convertersFrequency, currentand voltage convertersPWM / analogue, current,DC/DC convertersEasy to use.Compact design.Field or panel mounting.Constant output signals.Signal converterVersatile solutionsThe converter modules enable adaptation of process signalswhen the inputs or outputs of the mobile controllerR360 are not directly compatible with triggering hydraulicvalves and drives.The PWM / analogue converters convert the presentPWM signal into an analogue output signal. These devicesare mainly used for triggering valves which cannotdirectly evaluate a PWM signal. These valves are oftendirectly controlled by analogue joysticks when themachine is designed conventionally.For special current-controlled actuators (e.g. hydraulicdrives) the measured value is read via the analogueinputs of the R360. The CurrentControl module detectsthe measured current and provides it as input signal.Further processing is then carried out in the applicationprogram.If the ratiometric inputs of the R360 cannot be used anda constant supply voltage is needed, e.g. for joysticks,the DC/DC converter can be used. It supplies a constantoutput voltage of 10 V DC even in case of voltage fluctuations.Signal convertersPWM / analogue,current, DC/DCconvertersFrequency,currentand voltageconvertersPage126 - 127126