Inclination sensors

Displays, input modulesand camera systemsConvenient:Parameter settingof the PDM360at the PC.GeneralinformationDialoguemodulesDiagnosisand serviceSensorsfor mobileapplicationsSignalconvertersConnectiontechnologyI/O-modulesMobilecontrollersList of articlesAs an alternative, the PDM360 monitors can be configured as a terminal.They are then configured as CANopen slaves. The necessary data objects aredefined by the programmer, depending on the application. After completionof this communication interface between the machine controller and thedialogue module an EDS is generated and integrated when the machinecontroller is configured. The PDOs and SDOs are immediately available in thisapplication.Ethernet camera O2M for mobile applicationsIn addition to dialogue units to display machine information, camera systemsare used in many mobile machines and vehicles to monitor operationalareas. They give the user or driver information about blind spots. Today analoguecamera systems and monitors often perform this task. Disadvantage:a second screen must be mounted beside the operating panel.With the integrated network technology the O2M camera data is directlydisplayed on the dialogue module PDM360 (colour) with graphic capability.A separate monitor is no longer needed. Via a simple Ethernet hub or Ethernetswitch the camera image can be shown on any number of displays. It isalso possible to connect several O2M cameras to a display in this way.The modern CMOS sensor, the powerful controller and the integrated firmwareare the basis for image capturing and processing. White adjustmentand colour saturation can be set individually, if necessary. The digital capturingand transmission of the image data enable scaling and free positioningof the camera image. With a splitscreen representation, up to fourcamera images can be simultaneously displayed. In addition, the PDM360can be used to store individual images on a compact flash card. They can, forexample, be used for protocolling.Parameter setting of the camera functions and data transmission are directlydone from the application programmed with CoDeSys. Using functionblocks the displayed camera images can be mirrored, rotated, zoomed andscaled. If necessary, visualisation elements and the camera image can beshown simultaneously.O2M110 withmounting kit.AccessoriesTechnicalinformationand customerserviceVisit our website: www.ifm.com73