Inclination sensors

Sensors formobile applicationsInductive sensorsInductive efector m sensorse1 type approval of the GermanFederal Office for Motor Traffic.Increased temperature rangefrom -40...85 °C.IP 67: Ingress-resistant even undersevere environmental conditions.Rectangular design with 2 Acurrent rating.Robust design for mobile use withhigh shock and vibration resistance.Inductive efector msensorsRobust iductive sensors for mobile useThe new efector m units with increased sensing rangeof the mobile series are specially adapted for use in vehicles.The sensor is designed so that it meets the highestdemands.The e1 type approval of the German Federal Office forMotor Traffic certifies that the units comply with theautomotive standards and can therefore be installed onvehicles without invalidating their operating permit.For the design special attention has been given to resistanceto the most important environmental influences.The units pass environmental tests without problem, forexample salt spray test, temperature / humidity cycles,continuous shocks and vibrations.The sensors in round design are distinguished by theirhigh ingress resistance and withstand even high-pressurecleaning without problem. This is evidenced by theprotection rating IP 69 K. The permissible temperaturerange covers -40...85 °C. The rectangular switches aredistinguished by their high current rating.Connectors and splitter boxesType Description Orderno.Mounting clamp M12Mounting clamp M18Mounting clamp M30Angle bracket M12 x 1Angle bracket M18 x 1Angle bracket M30 x 1.5E11047E11048E11049E10735E10736E10737Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Sensors formobile applicationsSensorswith CANinterfaceAnaloguesensors /switchesSensors formobile applicationsInductiveefector msensorsInclinationsensorsInductivesensorsPage110 - 111112 - 113114 - 117116