Inclination sensors

Mobile controllersControllers and softwareCabinetControllerInputs for analogue, digital,diagnostic and pulse signals.Digital outputs designed as solidstateoutputs or potential-free relays.Usable as a controller for cockpitor operating panels.Freely programmableto IEC 61131-3.e1 type approval of the GermanFederal Office for Motor Traffic.CabinetController 16 bitSpace-saving control cabinet solutionFor large mobile machines cabins for operators are oftenused. In the environment around the driver's workplacemany signals, e.g. from switches, joysticks and signalindicators are generated. To ensure a low-cost connectionof these signals to the process controller, they arecollected at a central point, preprocessed and transferredvia CANopen.The CabinetController has been developed for thisapplication. Its flat design enables integration in dashboardsand operating panels. To connect the switches,sensors and actuators all important potentials arebrought out to the connectors. But the CabinetControlleris also used in small compact machines. Here thecontroller is often directly installed in a control cabinet.Therefore a high protection rating and robust housingare not required. All other important data of a mobilecontroller comply with those of the other controllersfrom the ecomat mobile family.Connectors and splitter boxesType Description Orderno.Plug set for CR0301, CR0302Plug set for CR0303RS-232 programming adapterfor CR0301, CR0302Cable with connectorAMP 6-pole, wired, 1.2 mCable with connectorAMP 10-pole, wired, 1.2 mCable with connectorAMP 14-pole, wired, 1.2 mCable with connectorAMP 18-pole, wired, 1.2 mEC2075EC2090EC2076EC1520EC1521EC1522EC1523Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Mobile controllersClassic-ControllerExtended-ControllerSmart-ControllerSafety-ControllerCabinet-ControllerCoDeSyssoftwareand toolsStarter setControllersandsoftwarePage36 - 3940 - 4142 - 4344 - 4546 - 4748 - 4950 - 5146