OpenEdge Management and OpenEdge Explorer: Configuration

Configuring AppServers and AppServer Internet Adapters
5–40
Table 5–19: AIA Advanced Features properties
Property Description
Internal administrative command Provides permission to see whether or not the
AIA is running successfully.
The check box is cleared by default.
Authorized IP list If the Internal administrative command
check box is selected, this box shows a
comma-separated list of IP addresses that are
allowed to access the AIA Adapter's internal
administrative commands.
To add or delete an IP address, click Edit and
type or remove an IP address in the box.
To allow any IP address to access the AIA
Adapter's internal commands, leave the box
blank. This is the default.
AppServer Keepalive Allows the AppServer to recognize that a
client bound to it is no longer connected.
Enable Actional Monitoring When enabled, allows you to configure
Actional instrumentation.
This property is disabled by default.
Actional Group Name Allows you to set the Group value that
Actional uses in creating flow maps. Setting
this property is optional.
Editing an AppServer Internet Adapter configuration
You can edit the configuration of an AppServer Internet Adapter.
To edit an AppServer Internet Adapter configuration:
1. Click Resources in the management console menu bar. The main resource types appear in
the list frame.
2. In the list frame, browse to and click the AppServer Internet Adapter whose configuration
you want to edit. The Details page for that instance appears in the detail frame.
3. Click Configuration. The Configuration page appears.
4. Click Edit. (For details about the properties, see Table 5–15 through Table 5–19.)
5. Make the configuration changes, and then click Save.