MPX Series Video Encoders Front Panel - Teleste

More documents

Recommendations

Info

Painted area is chosen for watching.Refresh video:Painting mode:Masking mode:Brush size:Mask colour:VIDEO INPUT SETTINGS - MODIFYClick Mask Editor menu under the VIDEO INPUT SETTINGS - MODIFYheading. Mask editor page appears on the screen. User can confi gure theencoder to automatically hide certain areas with a mask, which can beadjusted in terms of its colour.MASK EDITOR - VIDEO INPUT 1MASK EDITOR page contains settings for hiding certain areas from theencoded picture.EDIT TOOLSEnables/disables automatic video refreshingPainting mode adds area for watching --> highlights areaMasking mode removes area for watching --> hides areaSelect brush size for masking (x 1/2/3/4)Select brush colour for masking (gray/red/green/blue)22 MPX series video encoders WebUI user manual
Device video encoding settingscan be changed by clicking this linkLink To SDP fi le (Session Description Protocol). The SDPfi le contains stream parameters that are meant for 3rd partyapplications (e.g. SW decoders) to open/view the stream.Video standard:Input:Stream name:Status:Destination IP address:UDP port:Resolution: (*MJPEG only)Bitrate:Framerate:VIDEO ENCODING SETTINGSClick “Video” menu under the Confi guration heading. Depending on thecofi guration, either MPEG4, MJPEG or MJPEG2 encoding settings pageappears on the screen. This page shows device’s video encoding settings.Video standard type (PAL or NTSC), can be change from COMMONSETTINGS - MODIFY pageActive video input(s)User defi nable alias name for the video inputVideo status, either active or no signalMulticast: Multicast IP address / multicast groupUnicast: IP address of receiving decoderUDP port numberVideo resolution, either QCIF/CIF/2CIF/4CIFad/4CIF/4CIFpi* or D1Encoded video bitrate, 9.6 Kbps...8 Mbps (MPEG-4/MJPEG/MPEG-2)Encoded video framerate, 1...30 fps (MPEG-4/MJPEG/MPEG-2)Edit Video Encoding Settings:Opens video encoding settings pageResolution PAL NTSC Framerate Interlaced NoteD1 720 x 576 720 x 480 25 PAL, 30 NTSC YesHALF D1 352 x 576 352 x 480 25 PAL, 30 NTSC Yes4CIFad 704 x 576 704 x 480 1...25 PAL, 1...30 NTSC Yes4CIF 704 x 576 704 x 480 1...25 PAL, 1...30 NTSC No4CIFpi 704 x 576 704 x 480 1...25 PAL, 1...30 NTSC Yes MJPEG only2CIF 704 x 288 704 x 240 1...25 PAL, 1...30 NTSC NoCIF 352 x 288 352 x 240 1...25 PAL, 1...30 NTSC NoQCIF 176 x 144 176 x 112 1...25 PAL, 1...30 NTSC NoAvailable video resolutions.MPX series video encoders WebUI user manual 23
Page 3: MPX Series Video Encoders Introduct
Page 6 and 7: TLMPX Series Video Encoders Front P
Page 8 and 9: InstallationQuick instructions12345
Page 10 and 11: RS422 is a balanced data format. Si
Page 12 and 13: Audio connection (MPC/MPX two/four
Page 14 and 15: Ethernet connectionsEthernet connec
Page 16 and 17: Video streamingVideo 1MPUMPC-E1 con
Page 18 and 19: How to change the settingsGeneralTh
Page 20 and 21: StartingTo create a WebUI session t
Page 22 and 23: When monitoring an area for securit
Page 26 and 27: QP (QuantizationParameter) 1 to 31.
Page 28 and 29: VIDEO ENCODING SETTINGS - MODIFYAdd
Page 30 and 31: VIDEO ENCODING SETTINGS - MODIFYVer
Page 32 and 33: Link To SDP fi le (Session Descript
Page 34 and 35: Video standard:Primary Server Direc
Page 36 and 37: PICTURE UPLOAD SETTINGS - MODIFYVer
Page 38 and 39: Input:Name:Status:Algorithm:Sensiti
Page 40 and 41: As an example:-Threshold: 30%-Filte
Page 42 and 43: Name:Status:Connection Type:IP addr
Page 44 and 45: CONTACT CLOSURE SETTINGSClick “Co
Page 46 and 47: SAP Service:Multicast TTL:Announcem
Page 48 and 49: RTSP Service:Current bandwidth:Maxi
Page 50 and 51: Video Standard:Join Multicast Group
Page 52 and 53: NETWORKClick “Network” menu und
Page 54 and 55: The address for default Gateway can
Page 56 and 57: SERVICESClick “Services” menu u
Page 58 and 59: USER MANAGEMENTClick “User manage
Page 60 and 61: Connection methods - Serial connect
Page 62 and 63: Detailed descriptions of CLI comman
Page 64 and 65: Ping commandUse the ping command to
Page 66 and 67: Eraseconf commandThe default factor
Page 68 and 69: 2. Select ActionSelect trigger and
Page 70 and 71: Changing Contact closure output sta
Page 72: www.teleste.com

MPX Series Video Encoders Front Panel - Teleste

Create successful ePaper yourself

Delete template?

Save as template?