MPX Series Video Encoders Front Panel - Teleste
MPX Series Video Encoders Front Panel - Teleste
MPX Series Video Encoders Front Panel - Teleste
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The address for default Gateway can be set from WebUI usingthe default route setting in the following way -> destination0.0.0.0, netmask 0.0.0.0 and then desired address for the GW.Destination:Netmask:Gateway:Interface:NETWORK - MODIFYClick “Edit IP Routes” menu under the IP routes heading. Network -modify / IP routes page appears on the screen. This page showsdevice’s network settings.IP ROUTESDestination IP addressMask for subnet defi nitionGateway address for router defi nition. Device and gateway addressesshould be in the same network.Note! Gateway address should be set before enablingmulticast videoOptions are eth0 and eth1 (depends on device)Add new route:Opens a page where can to add new routes52 <strong>MPX</strong> series video encoders WebUI user manual