MPX Series Video Encoders Front Panel - Teleste

Command Line Interface - CLIGeneralThe MPX series video encoder unit includes a command line interface(CLI) for confi guration purposes. The CLI is a screen interface thatallows the user to interact with the operating system by enteringcommands and optional arguments.CLI is accessed through any terminal emulator application(e.g. Hyper Terminal or PuTTY). The command structure is the samefor all session types.The CLI can be accessed in the following ways:• Serial data connection (RS232), via Mgmt port, with a serialconnection cable• TCP/IP connection, via active Ethernet port, with a Ethernetconnection cableSystem requirements for CLIConnection through management (Mgmt) port locally:* PC equipped with terminal emulator application supporting VT100 /102 or ANSI protocols, e.g. Hyper Terminal and PuTTY* RS232-cable (type Teleste CIC504)Connection through Ethernet port remotely:* PC equipped with terminal emulator application supporting SecureShell (SSH) network protocol, e.g. PuTTY* Ethernet-cable (e.g. type Teleste OPUS1CAA0300X)MPX series video encoders CLI user manual 57