MPX Series Video Encoders Front Panel - Teleste

Note! See page 9 fordetailed descriptionSerial port:Name:Connection Type:Active:IP address:Port:Mode:Baudrate:Bits:Parity:Stopbits:Term:Bias:TERMINAL SERVER SETTINGS - MODIFYClick “Edit Terminal Server Settings” menu under the TERMINALSERVER SETTINGS heading. Terminal server settings modify pageappears on the screen. Device terminal server settings can be changedon this page.Enable/disable required data interfaceUser defi nable alias name for data interface (max 16 chars)Point-to-point type data transmission is established by selecting the“TCP server” and “TCP client” settings between the data ports (if theencoder is set to be “TCP server”, then the encoder must be set to “TCPclient”, or vice versa). In UDP multicast mode the service mode isdetected automatically.Set active when required data channel is taken in useDestination IP addressUDP port number (0...65535). This number has to be same at bothencoder and decoder pairsData connection protocol towards the external device, options areRS232/422/485 2-wire/485 4-wireData channel connection speed (range 2400...115200 bps)Number of data bits. Options are 5, 6, 7, 8 & 9A data-checking technique, which uses an extra bitOptions are 1 or 2Selected/unselectedSelected/unselectedMPX series video encoders WebUI user manual 41