MPX Series Video Encoders Front Panel - Teleste

Ping commandUse the ping command to test is there a specifi c IP address accessible innetwork. Entering help ping displays a list of options for ping command.Usage: ping [OPTION]... hostSend ICMP ECHO_REQUEST packets to network hosts.Options:-c COUNT Send only COUNT pings-s SIZE Send SIZE data bytes in packets (default=56)-q Quiet mode, only displays output at startand when finishedReboot commandUse the reboot command to restart the device. Entering help rebootdisplays a list of options for reboot command.Usage: reboot [-d] [-n] [-f]Reboot the system.Options:-d delay interval for rebooting-n no call to sync()-f force reboot (don’t go through init)Route commandUse the route command to edit the kernel’s routing tables. Entering helproute displays a list of options for route command.Usage: route [{add|del|delete}]Edit the kernel’s routing tables.Options:-n Dont resolve names-e Display other/more information-A inet Select address familyTftpswud commandtftpswud usage example:Tftpswud 4.2.10192.168.0.100Uploads the fi rmware imageversion number 4.2.10 fromaddress 192.168.0.100.The fi rmware fi lename is in theform MP-E8-4.2.10.tar.gz forMPX-E8 and MP-C-4.2.10.tar.gz for MPC-E1/E2/E4Use the tftpswud command to change device’s fi rmware. Entering helptftpswud displays a list of options for tftpswud command.Note! TFTP server must be installed, confi gured correctly andactivated before using tftpswud command.Usage: tftpswud 62 MPX series video encoders CLI user manual