MPX Series Video Encoders Front Panel - Teleste

More documents

Recommendations

Info

NETWORKClick “Network” menu under the Administration heading. Networkconfi guration page appears on the screen. This page shows device’snetwork settings.Hostname:Alias name for the deviceInterface:Status:IP address:Netmask:MAC:Speed/Duplex:MTU:Destination:Netmask:Gateway:Interface:ETHERNET INTERFACESInterface name, eth0 = Ethernet port A & eth1 = Ethernet port BNetwork statusIP address of the deviceNetmask address of the deviceMAC address of the deviceTransmission parameters, network connection type and speedMTU (Maximum Transmission Unit) valueIP ROUTESDestination IP addressMask for subnet defi nitionGateway address for router defi nition. Gateway address is necessaryfor multicasting video. Device and gateway addresses should be in thesame networkNote! Gateway address should be set before enablingmulticast videoOptions are eth0 and eth150 MPX series video encoders WebUI user manual
NETWORK - MODIFYClick “Edit Ethernet Interfaces” menu under the Ethernet Interfacesheading. Network - modify /Ethernet interfaces page appears on thescreen. Device Ethernet interface settings can be changed on this page.Hostname:User defi nable alias name for the deviceEnabled:DHCP:IP address:Netmask:Speed/Duplex:MTU:ETHERNET INTERFACESEnables/disables Ethernet interface. Depending on the model, there iseither one or two Ethernet ports available (eth0 = Ethernet port A andeth1 = Ethernet port B)DHCP client operation enabled/disabled. If enabled, the device gets its IPaddress from the DHCP server.IP address of the deviceNote! If this is changed, a new connection with the new IP addressmust be assigned to be able to continue with WebUI sessionNetmask address of the deviceTransmission parameters, options are auto, 100base-FD, 100base-HD,10base-FD and 10base-HF (FD = full duplex, HD = half duplex)Note! These parameters have to be same at both endocer anddecoder endsMTU (Maximum Transmission Unit) value (max 1500)Note! Video packet will not go under 1200 bytes. The rest of thepackets (data,...) will not go under 500 bytes.Note! Unit reboot is required for MTU changes to take place.MPX series video encoders WebUI user manual 51
Page 3: MPX Series Video Encoders Introduct
Page 6 and 7: TLMPX Series Video Encoders Front P
Page 8 and 9: InstallationQuick instructions12345
Page 10 and 11: RS422 is a balanced data format. Si
Page 12 and 13: Audio connection (MPC/MPX two/four
Page 14 and 15: Ethernet connectionsEthernet connec
Page 16 and 17: Video streamingVideo 1MPUMPC-E1 con
Page 18 and 19: How to change the settingsGeneralTh
Page 20 and 21: StartingTo create a WebUI session t
Page 22 and 23: When monitoring an area for securit
Page 24 and 25: Painted area is chosen for watching
Page 26 and 27: QP (QuantizationParameter) 1 to 31.
Page 28 and 29: VIDEO ENCODING SETTINGS - MODIFYAdd
Page 30 and 31: VIDEO ENCODING SETTINGS - MODIFYVer
Page 32 and 33: Link To SDP fi le (Session Descript
Page 34 and 35: Video standard:Primary Server Direc
Page 36 and 37: PICTURE UPLOAD SETTINGS - MODIFYVer
Page 38 and 39: Input:Name:Status:Algorithm:Sensiti
Page 40 and 41: As an example:-Threshold: 30%-Filte
Page 42 and 43: Name:Status:Connection Type:IP addr
Page 44 and 45: CONTACT CLOSURE SETTINGSClick “Co
Page 46 and 47: SAP Service:Multicast TTL:Announcem
Page 48 and 49: RTSP Service:Current bandwidth:Maxi
Page 50 and 51: Video Standard:Join Multicast Group
Page 54 and 55: The address for default Gateway can
Page 56 and 57: SERVICESClick “Services” menu u
Page 58 and 59: USER MANAGEMENTClick “User manage
Page 60 and 61: Connection methods - Serial connect
Page 62 and 63: Detailed descriptions of CLI comman
Page 64 and 65: Ping commandUse the ping command to
Page 66 and 67: Eraseconf commandThe default factor
Page 68 and 69: 2. Select ActionSelect trigger and
Page 70 and 71: Changing Contact closure output sta
Page 72: www.teleste.com

MPX Series Video Encoders Front Panel - Teleste

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?