MPX Series Video Encoders Front Panel - Teleste

CodecSamplerateConnector:AUDIO IN/OUT tickbox:Name:IP address:Port:DSCPMode:Connector:AUDIO SETTINGS - MODIFYClick “Edit Audio Settings” menu under the AUDIO SETTINGSheading. Audio settings modify page appears on the screen. Deviceaudio settings can be changed on this page.CODEC SETTINGSAudio codec.Select one of the available samplerate values (8KHz or 32 KHz).(Setting a higher samplerate value improves audio fi le quality andincreases its size).SOCKET SETTINGSAudio IN Left / Volume: Set a value for audio left volume (0...100%).Audio IN Right / Volume: Set a value for audio right volume (0...100%).STREAM SETTINGSEnable/disable audio channel.User defi nable name/description for the audio stream (max 16 chars).Destination IP address.Multicast: Multicast IP address / multicast group. This multicast IPaddress has to be same at both encoder and corresponging decoders.Unicast: IP address of receiving encoder.UDP port number (0...65535). This number has to be same at bothencoder and decoder pairs.(Defi nition of the Differentiated Services) fi eld lets you set bits in the streamIP header allowing a network device to apply rules such as how the packetis forwarded in the network and QoS (Quality of service) management.Audio channel mode.Audio connector (Audio in/out).MPX series video encoders WebUI user manual 31