MPX Series Video Encoders Front Panel - Teleste

NETWORK - MODIFYClick “Edit Ethernet Interfaces” menu under the Ethernet Interfacesheading. Network - modify /Ethernet interfaces page appears on thescreen. Device Ethernet interface settings can be changed on this page.Hostname:User defi nable alias name for the deviceEnabled:DHCP:IP address:Netmask:Speed/Duplex:MTU:ETHERNET INTERFACESEnables/disables Ethernet interface. Depending on the model, there iseither one or two Ethernet ports available (eth0 = Ethernet port A andeth1 = Ethernet port B)DHCP client operation enabled/disabled. If enabled, the device gets its IPaddress from the DHCP server.IP address of the deviceNote! If this is changed, a new connection with the new IP addressmust be assigned to be able to continue with WebUI sessionNetmask address of the deviceTransmission parameters, options are auto, 100base-FD, 100base-HD,10base-FD and 10base-HF (FD = full duplex, HD = half duplex)Note! These parameters have to be same at both endocer anddecoder endsMTU (Maximum Transmission Unit) value (max 1500)Note! Video packet will not go under 1200 bytes. The rest of thepackets (data,...) will not go under 500 bytes.Note! Unit reboot is required for MTU changes to take place.MPX series video encoders WebUI user manual 51