MPX Series Video Encoders Front Panel - Teleste

Uptime commandUse the uptime command to display the time since the last boot.Entering help uptime displays a list of options for uptime command.Usage: uptimeDisplay the time since the last boot.Appselect commandUse the appselect command to display device’s current applicationconfi guration. Entering help appselect displays a list of options forappselect command.Usage: appselect [application number]This command prints current application configuration.To select new application into use and reboot device, use command with new application number.Example: appselect 1-> Application 1 will be activated and device rebootedChangelog commandUse the changelog command to display the changes for fi rmware.Ctrl -c is the interrupt key sequency and returns user to the prompt.Usage: changelogPrint application changelog. No options available.Passwd commandUse the passwd command to change password for current user.Enter the new password (minimum of 5, maximum of 8 characters). Pleaseuse a combination of upper and lower case letters and numbers. Enteringhelp passwd displays a list of options for passwd command.Usage: passwdChange password for current user. No options available.Version commandUse the version command to display the current fi rmware version ofthe device. Entering help version displays a list of options forversion command.Usage: versionPrint current software version. No options available.MPX series video encoders CLI user manual 63