MPX Series Video Encoders Front Panel - Teleste

Sample scenariosThe following scenarios are examples of how the event management systemcan control video streams. When changing the settings, remember click OKbutton to confi rm settings.Switching I-frames only to full frames stream by motiondetection sensorIn this case Encoder streams I-frames only in normal mode. When motion isdetected in video channel 1, encoder starts streaming full frame video.Select “2: Normal: I-Frames / Triggered: All” option1. Click “Connection” menu under the Confi guration/Video/Edit VideoEncoding Settings page and select “2: Normal: I frames / Triggered:All” option from the Filtering (Normal/Triggered) pull-down menu.Select “1: Level sensitive trigger high” option2. Select the MD1 for the input where camera is connected from “Actions”menu under the Confi guration/Motion Detection/Edit Motion Detectionpage and select “1: Level sensitive trigger high” option from the Actionpull-down menu.Switching I-frames only to full frames stream by contactclosure input sensorIn this case encoder streams I-frames only in normal mode. When CCinput 1 is closed, encoder starts streaming full frame video.Select “2: Normal: I-Frames / Triggered: All” option1. Click “Connection” menu under the Confi guration/Video/Edit VideoEncoding Settings page and select “2: Normal: I frames / Triggered: All”option from the Filtering (Normal/Triggered) pull-down menu.Select “CC INPUT 1” optionSelect “1: Level sensitive trigger high” optionNote! CC polarity can set to reversed by changing Actionsetting to “5:Level sensitive trigger low”. See table“Action linking items and their descriptions”.2. Select the MD1 for the input where camera is connected from “Actions”menu under the Confi guration/Motion Detection/Edit Motion Detectionpage and select “1: Level sensitive trigger high” option from the Actionpull-down menu.MPX series video encoders user manual 67