GPS-NAVIGATOR GP-32 & GP-37

5. DESTINATIONDestination can be set four ways: by cursor,by waypoint, by route, and by MOB position.Previous destination is cancelled whenever adestination is newly set.A dashed line connects own ship and thedestination, which is marked with “CURSOR”and an “X,” as shown in the illustration below.5.1 Setting Destination byCursor1. Press the [GOTO] key to display theGOTO options window.GOTO options2. Choose “CURSOR?.”3. Press the [ENT] key. The plotter displayappears, with “?” shown to the right of thecursor.Destination set by cursor5.2 Setting Destination byWaypoint1. Press the [GOTO] key.2. Choose “WPT-LIST?” or “WPT-NEAR?”.3. Press the [ENT] key. The SELECT GOTOWPT list appears.Cursor appearancewhen setting destination by cursor4. Use the cursor pad to place the cursor onthe location desired for destination.5. Press the [ENT] key.SELECT GOTO WPT screens4. Choose a waypoint.5. Press the [ENT] key.Own ship’s position becomes the startingpoint and a dashed line runs between it andthe waypoint selected, which is shown inreverse video.27