GPS-NAVIGATOR GP-32 & GP-37

7. OTHER FUNCTIONS4. Press the [ENT] key.LOADING START? prompt5. Set up the YEOMAN to output data.6. Press ? to choose YES and then pressthe [ENT] key to load data.Message when waypoints are being loaded7. Data is loaded to empty location and thebuzzer sounds twice to signify successfulloading. If there is not enough memoryfree to store the waypoints, the messagebelow appears.7: Waypoint comment (2 byte for mark code+ 16 characters of comment.)1st byte of mark code: Fixed to '@'.2nd byte of mark code: Internal markcode + 'a' (0 x 61). See Note 1 on thenext page.Number of characters for comment isless than 16 (variable length). See Note 2on the next page.8: Flag making waypoint. Always set to “A”.“A”: Displayed”V”: Not displayed9: UTC (Always NULL)10: Day (Always NULL)11: Month (Always NULL)12: Year (Always NULL)Note 1: Internal mark code is 0 x 10 through0 x 18. 0 x 71 through 0 x 79 are alwaysplaced at 2nd byte of mark code.Note 2: Following characters can be used forcomments:Message when waypointscould not be loadedCharacters available for commentsRoute data formatWaypoint data formatWaypoint data format1: Waypoint latitude2: N/S3: Waypoint longitude4: E/W5: Waypoint name (Number of characters isfixed to 6 and space code is placed whenthe number of characters are less than6.)6: Waypoint color (This field is always keptNULL.)Route data format1: Number of sentences required for onecomplete route data (1 to 4). See Note.2: Number of sentences currently used (1 to4)3: Message mode (Always set to C).4: Route No. (01 to 51 (51 is LOG route, 2digits required)5 through 12: Waypoint name (Max. 8names, length of eachwaypoint name is fixed to 7byte)45