GPS-NAVIGATOR GP-32 & GP-37
GPS-NAVIGATOR GP-32 & GP-37
GPS-NAVIGATOR GP-32 & GP-37
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. ALARMS6.3 Speed AlarmThe speed alarm provides visual and auralalerts when the ship’s speed is higher (orlower) than the alarm range set.1. Press the [MENU] key once or twice toopen the menu.2. Choose ALARMS.3. Press the [ENT] key.4. Choose SPEED and then press the [ENT]key.5. Choose LOW or HIGH as appropriate andthen press the [ENT] key.LOW: Alarm sounds when speed is lowerthan speed set.HIGH: Alarm sounds when speed ishigher than speed set.6. Press the [ENT] key. Enter speed(0.0-999.9 kt) with the cursor pad.7. Press the [ENT] key.8. Press the [MENU] key twice to finish.When the speed alarm setting is violated, thebuzzer sounds and the message SPDALARM! and the alarm icon appear.6.4 WAAS/D<strong><strong>GP</strong>S</strong> AlarmThis alarm alerts you by aural and visualalarms when the WAAS/D<strong><strong>GP</strong>S</strong> signal is lost.Note that ON cannot be selected if “MODE” inthe WAAS/D<strong><strong>GP</strong>S</strong> menu is set to <strong><strong>GP</strong>S</strong>.1. Press the [MENU] key once or twice toopen the menu.2. Choose ALARMS.3. Press the [ENT] key.4. Choose WAAS/D<strong><strong>GP</strong>S</strong> and then press the[ENT] key.5. Choose ON.6. Press the [ENT] key.7. Press the [MENU] key twice to finish.When the D<strong><strong>GP</strong>S</strong>/WAAS signal is lost, thebuzzer sounds and a message (see tablebelow) and the alarm icon appear. Further,the default position is shown.WAAS/D<strong><strong>GP</strong>S</strong> mode and alarm messageMODE onWAAS/D<strong><strong>GP</strong>S</strong>menuWAASINT BEACON,EXT BEACONAUTO6.5 Time AlarmAlarm condition, alarmmessageAlarms released whenreceiver status changes fromW2D or W3D to 2D or 3D.“WAAS ERROR!” and thealarm icon appear when thisoccurs.Alarms released whenreceiver status changes fromD2D or D3D to 2D or 3D.“D<strong><strong>GP</strong>S</strong> ERROR!” and thealarm icon appear when thisoccurs.Alarms released whenreceiver status changes fromD2D, D3D, W2D or W3D to2D or 3D. “WAAS/D<strong><strong>GP</strong>S</strong>ERROR!” and the alarm iconappear when this occurs.The time alarm works like an alarm clock,releasing audio and visual alarms when thetime entered has come.1. Press the [MENU] key once or twice toopen the menu.2. Choose ALARMS.3. Press the [ENT] key.4. Choose TIME and then press the [ENT]key.5. Choose ON and then press the [ENT] key.6. Press the [ENT] key.7. Enter time desired with the cursor pad.8. Press the [ENT] key.9. Press the [MENU] key twice to finish.When the time entered has come, the buzzersounds and the message TIME ALARM! andthe alarm icon appear.31
Change language