GPS-NAVIGATOR GP-32 & GP-37

7. OTHER FUNCTIONS7.1 Calculating Range,Bearing, TTG and ETARange and bearing between twowaypoints1. Press the [MENU] key once or twice toopen the menu.2. Choose CALCULATE and then press the[ENT] key.10. Press the [ENT] key. Enter speed with thecursor pad and then press the [ENT] key.The illustration below shows what thedisplay might look like using waypointsKOBE and OSAKA as the FROM and TOwaypoints, respectively.CALCULATION menu3. The cursor is selecting MODE. Press the[ENT] key.Range and bearing calculation options4. Choose WAYPOINTS and then press the[ENT] key.5. Press the [ENT] key.6. Enter the FROM waypoint and then pressthe [ENT] key.7. Press the [ENT] key, enter the TOwaypoint and then press the [ENT] key.8. Press the [ENT] key to display the speedinput options.Speed input options9. Choose AUTO or MAN and then press the[ENT] key. AUTO uses ship’s averagespeed; MAN is for manual entry of speed.For AUTO, see the illustration after step10 for sample range and bearingcalculation. For MAN, go to step 10.Typical range and bearing calculationbetween two waypoints11. Press the [MENU] key twice to finish.Range, TTG and ETA between first andfinal waypoints of a routeYou can easily find the range, TTG and ETAbetween the first and final waypoints of aroute as follows:1. Press the [MENU] key once or twice toopen the menu.2. Choose CALCULATE and then press the[ENT] key.3. Press the [ENT] key.4. Choose ROUTE and then press the [ENT]key.5. Press the [ENT] key.6. Choose route number from the route listwith the cursor pad.7. Press the [ENT] key to open the speedinput options window.8. Choose AUTO or MAN. AUTO uses ship’saverage speed; MAN is for manual entryof speed.33