analysis of the influences of solar radiation and façade glazing ...

More documents

Recommendations

Info

References 104 References Addison, M. and Nall, D. 2001. Cooling via underfloor air distribution: Current design issues and analysis options. From: Cooling Frontiers: The Advanced Edge of Cooling Research and Applications in the Built Environment. Arizona State University : College of Architecture and Environmental Design, 2001. Al-Homoud, M.S. 2001. Computer-aided building energy analysis techniques. 2001. Building and Environment 36: 421–433.. Alvarez, G., et al. 2005. Spectrally selective laminated glazing consisting of solar control and heat mirror coated glass: preparation, characterization and modelling of heat transfer. 2005. Solar Energy 78: 113–124. ASHRAE. 2005. ASHRAE Handbook - Fundamentals. Atlanta : American Society of Heating, Refrigerating and Air Conditioning Engeneers Inc., 2005. ASHRAE. 1976. ASHRAE Systems Handbook. New York : American Society of Heating, Refrigerating and Air Conditioning Engineers, 1976. ASHRAE. 1999. HVAC Applications Handbook. Atlanta, Georgia : American Society of Heating, Refrigerating and Air Conditioning Engeneers Inc., 1999. ASHRAE-Standard-93-1986. 1991. Methods of Testing to Determine the Thermal Performance of Solar Collectors. Atlanta : American Society of Heating, Refrigerating and Air Conditioning Engeneers Inc., 1991. ASHRAE-Standard-96-1980. 1989. Methods of Testing to Determine the Thermal Performance of Unglazed Flat-Plate Liquid-Type Solar Collectors. Atlanta : American Society of Heating, Refrigerating and Air Conditioning Engeneers Inc., 1989. Badescu, V. 2008. Optimal control of flow in solar collector systems with fully mixed water storage tanks. 2008. Energy Conversion and Management 49: 169–184. Bakos, G.C. 2000. Insulation protection studies for energy saving in residential and tertiary sector. 2000. Energy and Buildings 3: 1251–259. Bartak, M., et al. 2002. Integrating CFD and building simulation. 2002. Building and Environment 37: 865 – 871.
References 105 Beausoleil-Morrison, I. 2001. The adaptive coupling of computational fluid dynamics with whole-building thermal simulation. 2001. In: Proceedings of Building Simulation, Rio de Janeiro, Brazil. Biaou, A.L. and Bernier, M.A. 2008. Achieving total domestic hot water production with renewable energy. 2008. Building and Environment 43: 651–660. Bojic, M., Kalogirou, S. and Petronijevic, K. 2002. Simulation of a solar domestic water heating system using a time marching model. 2002. Renewable Energy 27: 441–452. Broderick, C. and Chen, Q. 2001. A simple interface to CFD codes for building environment simulations. 2001. In: Proceedings of Building Simulation, Rio de Janeiro, Brazil. Cardinale, N., Piccininni, F. and Stefanizzi, P. 2003. Economic optimization of low-flow solar domestic hot water plants. 2003. Renewable Energy 28: 1899–1914. Chaurasia, P.B.L. and Twidell, J. 2001. Collector cum storage solar water heaters with and without transparent insulation material. 2001. Solar Energy 70 (5): 403–416. Crawley, D.B., et al. 2008. Contrasting the capabilities of building energy performance simulation programs. 2008. Building and Environment 43: 661–673. Crawley, D.B., et al. 2005. Contrasting the capabilities of building energy performance simulation programs. Washington, DC : US Department of Energy, 2005. Dahm, J., et al. 1998. Evaluation of storage configurations with internal heat exchangers. 1998. Solar Energy, Vol. 62 (6): 407–417. Davies, M., Zoras, S. and Adjali, M.H. 2001. Improving the efficiency of the numerical modelling of built environment earth-contact heat transfers. 2001. Applied Energy 68: 31– 42. Degelman, L. and Kim, B. 1991. RENCON program for Energy Simulation. 1991. College Station, TX: Texas A&M University. DEROB-LTH. 2005. User Manual for Windows - Report No. TABK-95/7019. Lund University, Sweden : Lund Institute of Technology, Department of Building Science, 2005. Dombayci, O.A., Golcu, M. and Pancar, Y. 2006. Optimization of insulation thickness for external walls using different energy-sources. 2006. Applied Energy 83: 921–928. Duffie, J.A. and Beckman, W.A. 1991. Solar Engineering of Thermal Processes. New York : Wiley-Interscience, 1991. Second Edition. DVNBauO. 2004. Allgemeine Durchführungsverordnung zur Niedersächsischen Bauordnung, § 19. Hannover : Land Niedersachsen, 2004.
Page 1 and 2:
ANALYSIS OF THE INFLUENCES OF SOLAR
Page 3 and 4:
than the inner air temperature. It
Page 5 and 6:
4.1 SUMMARY .......................
Page 7 and 8:
Subscripts σ - Stefan-Boltzmann co
Page 9 and 10:
1.1 Introduction 9 Another problem,
Page 11 and 12:
1.2 Background and literature revie
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
2.1 Building energy simulation soft
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
2.2 Experimental research methods 4
Page 49 and 50:
Page 51 and 52:
Page 53 and 54: 3.1 Building description 53 Fig. 3.
Page 55 and 56: 3.1 Building description 55 All int
Page 57 and 58: 3.1 Building description 57 Case B5
Page 59 and 60: 3.1 Building description 59 Of cour
Page 61 and 62: 3.1 Building description 61 Outside
Page 63 and 64: 3.1 Building description 63 In orde
Page 69 and 70: 3.2 Selection of the optimal glazin
Page 71 and 72: 3.3 Estimation of thermal energy ga
Page 79 and 80: 3.4 Testing of a building indoor en
Page 81 and 82: 36 34 32 30 28 26 24 22 20 18 36 34
Page 83 and 84: 3,00 2,50 2,00 1,50 1,00 0,50 0,00
Page 91 and 92: 3.5 Optimization of a solar domesti
Page 99 and 100: 4.1 Summary 99 4 Summary and conclu
Page 101 and 102: 4.2 Comments and conclusions 101 So
Page 103: 4.3 Future research 103 of the annu
Page 107 and 108: References 107 Hendron, R., et al.
Page 109 and 110: References 109 Rees, S. and Haves,
Page 111 and 112: References 111 Yohanis, Y.G., et al
Page 113 and 114: Appendix 1 113 Fig. A1.1 VASATI 2.0
Page 123 and 124: Appendix 2 123 !-Generator IDFEdito
Page 125 and 126: Appendix 2 125 0.035, !- Conductivi
Page 127 and 128: Appendix 2 127 , !- Zone Inside Con
Page 129 and 130: Appendix 2 129 Discrete; !- Numeric
Page 131 and 132: Appendix 2 131 Fraction, !- Schedul
Page 133 and 134: Appendix 2 133 Air Conditioner:Wind
Page 135 and 136: Appendix 2 135 , !- Sensible Heat F
Page 137 and 138: Appendix 2 137 281, !- Lighting Lev
Page 139 and 140: Appendix 2 139 OG2 InfilTRATION, !-
Page 141 and 142: Appendix 2 141 OG3, !- Zone Name 16
Page 143 and 144: Appendix 2 143 0.004, !- Zone Heati
Page 145 and 146: Appendix 2 145 Zone15WindACAirInlet
Page 147 and 148: Appendix 2 147 0, !- Maximum Flow R
Page 149 and 150: Appendix 2 149 Zone16WindACOAMixer,
Page 151 and 152: Appendix 2 151 Zone 9 Outlet Node;
Page 153 and 154: Appendix 2 153 Stand Alone ERV 16,
Page 155 and 156:
Appendix 2 155 ZoneHVAC:WindowAirCo
Page 157 and 158:
Appendix 2 157 ZoneHVAC:Baseboard:C
Page 159 and 160:
Appendix 2 159 Zone Control Type Sc
Page 161 and 162:
Appendix 2 161 WindACPLFFPLR, !- Pa
Page 163 and 164:
Appendix 2 163 Stand Alone ERV Supp
Page 165 and 166:
Appendix 2 165 0.03001, !- Maximum
Page 167 and 168:
Appendix 2 167 0.81, !- Sensible Ef
Page 169 and 170:
Appendix 2 169 !- == ALL OBJECTS IN
show all

analysis of the influences of solar radiation and façade glazing ...

Create successful ePaper yourself

Delete template?

Save as template?