analysis of the influences of solar radiation and façade glazing ...

More documents

Recommendations

Info

References 106 EN12975-2. 2007. Thermal solar systems and components. s.l. : European Standard, 2007. Solar collectors – Part 2: Test methods. EN1745:2004/Apl. 2006. Masonry and masonry products. Methods for determing design thermal values. s.l. : European Standard, 2006. EnergyPlus-Documentation. 2007. Getting Startet with EnergyPlus. s.l. : The board of trustees of University of Illinois and the regents of the University of California, 2007. Etzion, Y. and Erell, E. 2000. Controlling the transmission of radiant energy through windows: a novel ventilated reversible glazing system. 2000. Building and Environment 35: 433–444. Fang, Y., et al. 2007. Low emittance coatings and the thermal performance of vacuum glazing. 2007. Solar Energy 81: 8–12. Fissore, A. and Fonseca, N. 2007. Experimental study of the thermal balance of a window, design description. 2007. Building and Environment 42: 3309–3321. Fissore, A. and Fonseca, N. 2007. Measurement results and experimental analysis study of the thermal balance of a window. 2007. Building and Environment 42: 3570–3581. Florides, G.A., et al. 2002. Measures used to lower building energy consumption and their cost effectiveness. 2002. Applied Energy 73: 299–328. Furbo a, S., et al. 2005. Smart solar tanks for small solar domestic hot water systems. 2005. Solar Energy 78: 269–279. Furbo b, S., et al. 2005. Performance improvement by discharge from different levels in solar storage tanks. 2005. Solar Energy 79: 431–439. Furbo, S. and Knudsen, S. 2004. Low flow SDHW systems based on mantle tanks–recent findings. Freiburg, Germany : In proceedings of EuroSun 2004, 2004. Vol. 1: 272–281. Furbo, S. and Shah, L.J. 2003. Thermal advantages for solar heating systems with a glass cover with antireflection surfaces. 2003. Solar Energy 74: 513–523. Groth, C.C., Lokmanhekim, M. and Shadow. 1969. A New Technique for the Calculation of Shadow Shapes and Areas by Digital Computer. 1969. Second Hawaii International Conference on System Sciences, Honolulu, HI, January 22-24. Gunerhan, H. and Hepbasli, A. 2007. Exergetic modelling and performance evaluation of solar water heating systems for building applications. 2007. Energy and Buildings 39: 509–516. Haese, G. and Zukowski, M. 2007. Symulacje stanów termicznych pomieszczeń. 2007. Energia i Budynek. 9: 27–31.
References 107 Hendron, R., et al. 2004. Development of an Energy Savings Benchmark for All Residential End-Users. Bolder, Colorado, USA : SIMBUILD 2004 Conference, 2004. Holman, J.P. 1986. Heat transfer. 1986. McGraw-Hill, New York. International-Glazing-Database. 2008. IDDB Version 16.2. s.l. : THe Windows and Daylighting Group of the Lawrence Berkeley National Laboratory (LBNL), 2008. ISO15099. 2003. Thermal performance of windows, doors and shading devices - Detailed Calcualtions. 2003. James, P.A.B. and Bahaj, A.S. 2005. Smart glazing solutions to glare and solar gain: a ‘sick building’ case study. 2005. Energy and Buildings 37: 1058–1067. Kalogirou, S.A., Panteliou, S. and Dentsoras, A. 1999. Modelling of solar domestic water heating systems using artificial neural networks. 1999. Solar Energy Vol. 65 (6): 335–342. Khaled, A.A. 2003. Comparison between polystyrene and fiberglass roof insulation in warm and cold climates. 2003. Renewable Energy 28: 603–611. Kontoleon, K.J. and Bikas, D.K. 2002. Modelling the influence of glazed openings percentage and type of glazing on the thermal zone behavior. 2002. Energy and Buildings 34: 389–399. Kraft, D. 1994. Algorithm 733: TOMP – Fortran modules for optimal control calculations. 1994. ACM Trans. Math. Software 20 (3): 262–281. Kulkarni, G.N., Kedare, S.B. and Bandyopadhyay, S. 2007. Determination of design space and optimization of solar water heating systems. 2007. Solar Energy 81: 958–968. Lindberg, R., Binamu, A. and Teikari, M. 2004. Five-year data of measured weather, energy consumption, and time-dependent temperature variations within different exterior wall structures. 2004. Energy and Buildings 36: 495–501. Lollini, et al. 2006. Optimisation of opaque components of the building envelope. Energy, economic and environmental issues. 2006. Building and Environment 41: 1001–1013. Loutzenhiser, P.G., et al. 2007. Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation. 2007. Solar Energy 81: 254–267. Maliska, C. 2001. Issues on the integration of CFD to building simulation tools. 2001. In: Proceedings of Building Simulation, Rio de Janeiro, Brazil. Manza, H., et al. 2006. Series of experiments for empirical validation of solar gain modelling in building energy simulation codes – Experimental setup, test cell
Page 1 and 2:
ANALYSIS OF THE INFLUENCES OF SOLAR
Page 3 and 4:
than the inner air temperature. It
Page 5 and 6:
4.1 SUMMARY .......................
Page 7 and 8:
Subscripts σ - Stefan-Boltzmann co
Page 9 and 10:
1.1 Introduction 9 Another problem,
Page 11 and 12:
1.2 Background and literature revie
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
2.1 Building energy simulation soft
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
2.2 Experimental research methods 4
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
3.1 Building description 53 Fig. 3.
Page 55 and 56: 3.1 Building description 55 All int
Page 57 and 58: 3.1 Building description 57 Case B5
Page 59 and 60: 3.1 Building description 59 Of cour
Page 61 and 62: 3.1 Building description 61 Outside
Page 63 and 64: 3.1 Building description 63 In orde
Page 65 and 66: 3.1 Building description 65 Fig. 3.
Page 67 and 68: 3.1 Building description 67 Fig. 3.
Page 69 and 70: 3.2 Selection of the optimal glazin
Page 71 and 72: 3.3 Estimation of thermal energy ga
Page 79 and 80: 3.4 Testing of a building indoor en
Page 81 and 82: 36 34 32 30 28 26 24 22 20 18 36 34
Page 83 and 84: 3,00 2,50 2,00 1,50 1,00 0,50 0,00
Page 91 and 92: 3.5 Optimization of a solar domesti
Page 99 and 100: 4.1 Summary 99 4 Summary and conclu
Page 101 and 102: 4.2 Comments and conclusions 101 So
Page 103 and 104: 4.3 Future research 103 of the annu
Page 105: References 105 Beausoleil-Morrison,
Page 109 and 110: References 109 Rees, S. and Haves,
Page 111 and 112: References 111 Yohanis, Y.G., et al
Page 113 and 114: Appendix 1 113 Fig. A1.1 VASATI 2.0
Page 123 and 124: Appendix 2 123 !-Generator IDFEdito
Page 125 and 126: Appendix 2 125 0.035, !- Conductivi
Page 127 and 128: Appendix 2 127 , !- Zone Inside Con
Page 129 and 130: Appendix 2 129 Discrete; !- Numeric
Page 131 and 132: Appendix 2 131 Fraction, !- Schedul
Page 133 and 134: Appendix 2 133 Air Conditioner:Wind
Page 135 and 136: Appendix 2 135 , !- Sensible Heat F
Page 137 and 138: Appendix 2 137 281, !- Lighting Lev
Page 139 and 140: Appendix 2 139 OG2 InfilTRATION, !-
Page 141 and 142: Appendix 2 141 OG3, !- Zone Name 16
Page 143 and 144: Appendix 2 143 0.004, !- Zone Heati
Page 145 and 146: Appendix 2 145 Zone15WindACAirInlet
Page 147 and 148: Appendix 2 147 0, !- Maximum Flow R
Page 149 and 150: Appendix 2 149 Zone16WindACOAMixer,
Page 151 and 152: Appendix 2 151 Zone 9 Outlet Node;
Page 153 and 154: Appendix 2 153 Stand Alone ERV 16,
Page 155 and 156: Appendix 2 155 ZoneHVAC:WindowAirCo
Page 157 and 158:
Appendix 2 157 ZoneHVAC:Baseboard:C
Page 159 and 160:
Appendix 2 159 Zone Control Type Sc
Page 161 and 162:
Appendix 2 161 WindACPLFFPLR, !- Pa
Page 163 and 164:
Appendix 2 163 Stand Alone ERV Supp
Page 165 and 166:
Appendix 2 165 0.03001, !- Maximum
Page 167 and 168:
Appendix 2 167 0.81, !- Sensible Ef
Page 169 and 170:
Appendix 2 169 !- == ALL OBJECTS IN
show all

analysis of the influences of solar radiation and façade glazing ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?