6 modules - PI-VR GmbH

7 CAD CONVERTER CLI162· STEP AP214: STEP, .Step, .step, .STP, .stp· IGES: .IGES, .Iges, .iges, .IGS, .igs· VDA: .VDA, .vda· OpenInventor 2.0: .OIV, .Oiv, .oiv, .IV, .iv• -oPath : output path; default is directory, where the input fileis located• -minAcis : input minor version of ACIS to be exported, it shouldbe an integer;• -iProEpath : path to the part files ’*.prt*’ of a ProE assemply ’*.asm*’;default is the directory path of the assembly file; if the single parts are in adifferent directory, -iProEpath needs to be set.• -notFlatten: specifies the type of output; if this option is not set, assemblystructures in the output file are flattened• -ao: writes the assembly structure in a XML-file; no geometry will be converted;• -locale: if set, locale settings are used; otherwise are english (United States)settings used• -filter : if set, abstract nodes like a layer filter in CATIA V4 modelsare used to filter the geometry contained in the given CAD model; CATIAV4 models, for instance, always contain the standard layer filters ’ALL’ and’LAYCUR’;if the specified filter is not present in the model, all contained geometry istranslated instead» Translation properties• -ascii: write output file in ASCII format; default is -bin; set to ASCII, if outputformat is VRML2 or OSG; set to ASCII, if output format is STEP, IGES, orVDAFS;