6 modules - PI-VR GmbH

8.1 Truelight Materials· Mirrored Repeat: Repeats and mirrors the texture on the x- and y-axiswith every repetition.· Decal: The texture will not be repeated.· Clamp: Repeats only the last pixel of the texture.• Link repeat modes: Links the values to each other. When changing onevalue, the other one adapts it.• Repeat UV: Sets the number of repetitions for the Uvs.• Offset UV: Sets the offset for the UVs.• Rotate: Rotates the UVs.• Anisotropy: Sets the texture filter quality for the image texture. 1 is lowestquality. 16 is highest quality.• Minimum Roughness: Sets the minimum roughness which is determined bythe red color channel of the roughness texture.• Maximum Roughness: Sets the maximum roughness which is determined bythe red color channel of the roughness texture.» Bump Texture Settings» Use Texture: Loads an image texture for the diffuse color channel. Uses theimage as pattern on the surfaces.• Repeat Mode: Sets the repeat mode of the texture. There are four modes,which can be set:· Repeat: Repeats the texture in all directions. Repeat· Mirrored Repeat: Repeats and mirrors the texture on the x- and y-axiswith every repetition.· Decal: The texture will not be repeated.· Clamp: Repeats only the last pixel of the texture will be repeated.• Link repeat modes: Uses the same repeat mode for v-coordinates as for theu-coordinates.213