6 modules - PI-VR GmbH

More documents

Recommendations

Info

8.1 Truelight Materials» Flake Size: Sets the flake’s size.» Flake Intensity: Sets the flake’s contrast value of each flake’s normal direction.» Clearcoat Settings Sets the clearcoat color. The clearcoat is a transparent,strongly reflective paint layer on the base paint layer.» Clearcoat Type: The Fresnel Term describes the intensity of a reflection basedon the viewing angle. Its intensity at normal incidence is set by the material’sreflectivity.• Off: Turns off the clearcoat.• Fast: Uses a fast but less accurate approximation to the Fresnel Term.• Accurate: Uses a physically accurate evaluation of the Fresnel Term.» Clearcoat color: Sets the clearcoat color.» Reflectivity: Sets the clearcoat reflective intensity.» Use orange peel: Activates a noisy bump structure in the shader.• Orange peel frequency: Sets the bump structure’s noise frequency.• Orange peel intensity: Sets the bump structure’s intensity.For further information on the Displacement, Raytracing, Incandescence, Common andTransparency settings please refer to the ”General Truelight Material Settings” sectionat the beginning of the chapter.203
8 MATERIALS REFERENCE8.1.12 MultiPassMaterialThe MultiPassMaterial allows to layer TrueLight materials. The first material in the listis the first rendered and the following shaders are rendered according to their positionin list from top to bottom.» Sort key Sets the render priority of the MultiPassMaterial. Only supported inOpenGL mode.» Transparency mode Offers three different transparency modes.» Auto Detection: Set automatically the material order according to their transparency.» Force Transparent: Draws all transparent materials at last so that all transparentmaterials in the stack lays about the opaque materials.» Force Opaque: Draws all opaque materials at last so that all opaque materials inthe stack lays about the transparent materials.204
Page 2:
»VRED PhotoDocumentation» PI-VR G
Page 5 and 6:
Table of Contents4.5 Devices . . .
Page 7:
Table of Contents8.1.2 BrushedMetal
Page 11 and 12:
1 GETTING STARTED» Appropriate dri
Page 13 and 14:
1 GETTING STARTED3. The PI-VR GmbH
Page 15 and 16:
1 GETTING STARTED8. The installatio
Page 18 and 19:
2 USING VREDThis chapter contains b
Page 20 and 21:
2.3 Selection» Shift + Click RMB t
Page 24 and 25:
3 MENUS AND TOOLBARSThis chapter pr
Page 26 and 27:
3.1 Menus» VRED Project Binary - .
Page 28 and 29:
3.1 Menus» CubeImages: A dialogue
Page 30 and 31:
3.1 Menus» Undo/Redo History Displ
Page 32 and 33:
3.1 Menus» Realtime shadow: Activa
Page 34 and 35:
3.1 Menus» GeometryEditor Opens th
Page 36 and 37:
3.1 Menus3.1.8 RenderingIn this men
Page 38 and 39:
3.2 Toolbars3.2 Toolbars» File» O
Page 42 and 43:
4 PREFERENCESThis chapter provides
Page 44 and 45:
4.5 Devices4.5 Devices» Space Mous
Page 46 and 47:
4.7 FileIO4.7 FileIOSets the global
Page 48 and 49:
4.7 FileIO4.7.3 OSB/VPB» Loader»
Page 50 and 51:
4.8 Import» Writer» STL export fo
Page 52 and 53:
4.8 Import• 1 geometry / 1 Multip
Page 54 and 55:
4.12 Plugins» Trackball (2 Axis):
Page 56 and 57:
4.13 Render Options• Off: Switche
Page 58 and 59:
4.14 Render Settings» Enable Chann
Page 60 and 61:
4.14 Render Settings» Adaptive Sam
Page 62 and 63:
4.14 Render Settings» Mode:• Off
Page 64 and 65:
4.14 Render Settings» Photon Traci
Page 66:
4.17 Transform» Auto Scroll to Sel
Page 69 and 70:
5 SCENEGRAPHnode will be a child of
Page 71 and 72:
5 SCENEGRAPH» ClipPlane Creates a
Page 73 and 74:
5 SCENEGRAPH» Clone Using the clon
Page 75 and 76:
5 SCENEGRAPH5.3 Convert To» Group
Page 77:
5 SCENEGRAPH» Information... A dia
Page 81 and 82:
6 MODULES• Selected: Saves the se
Page 83 and 84:
6 MODULES82· 1/2” (6.400 w, 4.80
Page 85 and 86:
6 MODULES• Saturation: Sets the c
Page 87 and 88:
6 MODULES6.1.2 LightEditorScene »
Page 89 and 90:
6 MODULES· Linear: Light intensity
Page 91 and 92:
6 MODULES• Flush: Resets light se
Page 93 and 94:
6 MODULES» Copy: CTRL + C» Paste:
Page 95 and 96:
6 MODULES94• Apply Environment to
Page 97 and 98:
6 MODULES96» Edit:• Statistics:
Page 99 and 100:
6 MODULES» Search: When entering t
Page 101 and 102:
6 MODULES» Instant Mapping If inst
Page 103 and 104:
6 MODULESthe scene.The Ambient Occl
Page 105 and 106:
6 MODULES» Clear All: Deletes the
Page 107 and 108:
6 MODULES106
Page 109 and 110:
6 MODULES108• Normal Consistency:
Page 111 and 112:
6 MODULES6.1.7 NodeEditorScene » N
Page 113 and 114:
6 MODULES112tab.Once the variant is
Page 115 and 116:
6 MODULES» Light Variants To creat
Page 117 and 118:
6 MODULES» Remove Animations: Remo
Page 119 and 120:
6 MODULES6.2 Animation6.2.1 CurveEd
Page 121 and 122:
6 MODULES• Oscillate: Runs the cu
Page 123 and 124:
6 MODULES» pan: middle mouse click
Page 125 and 126:
6 MODULESattributes at a specific t
Page 127 and 128:
6 MODULES• Paste: Pastes a clip f
Page 129 and 130:
6 MODULES6.3 Interaction6.3.1 Trans
Page 131 and 132:
6 MODULES• Move To Object Center:
Page 133 and 134:
6 MODULES» Rename: Renames the sel
Page 135 and 136:
6 MODULES134» setSnapshotICCProfil
Page 137 and 138:
6 MODULES136• alpha: Sets the sta
Page 139 and 140:
6 MODULES138» pauseAnimation: Paus
Page 141 and 142:
6 MODULES» loadCluster: Loads a cl
Page 143 and 144:
6 MODULES142· Region Start XY: Def
Page 145 and 146:
6 MODULES• Frames Per Second: Set
Page 147 and 148:
6 MODULES146· Bspline Filter: The
Page 149 and 150:
6 MODULES148· Indirect Only: Uses
Page 151 and 152:
6 MODULES• Max Shadow Depth: Sets
Page 153 and 154: 6 MODULES6.4.2 RenderLayerRendering
Page 155 and 156: 6 MODULES» Right mouse context men
Page 158 and 159: 7 CAD CONVERTER CLIPlease note: The
Page 160 and 161: • -filter : if set, abstract node
Page 162 and 163: • -log: write log file• -meta:
Page 164 and 165: • -bin: write binary output file;
Page 166 and 167: • -narrow_reg_repair: narrow regi
Page 170 and 171: 8 MATERIALS REFERENCE8.1 Truelight
Page 172 and 173: 8.1 Truelight Materials» Subsurfac
Page 174 and 175: 8.1 Truelight Materials· Repeat Mo
Page 176 and 177: 8.1 Truelight Materials• Max Stil
Page 178 and 179: 8.1 Truelight Materials» Lighting
Page 180 and 181: 8.1 Truelight MaterialsOn metallic
Page 182 and 183: 8.1 Truelight Materials• Use ICC
Page 184 and 185: 8.1 Truelight Materials• Repeat M
Page 186 and 187: 8.1 Truelight Materialswill be rend
Page 188 and 189: 8.1 Truelight Materials8.1.4 Carbon
Page 190 and 191: 8.1 Truelight Materials• Bump Int
Page 192 and 193: 8.1 Truelight Materials» Roughness
Page 194 and 195: 8.1 Truelight Materials8.1.6 Enviro
Page 196 and 197: 8.1 Truelight Materials» Blending:
Page 198 and 199: 8.1 Truelight Materials» Select Me
Page 200 and 201: 8.1 Truelight Materials» Use Textu
Page 202 and 203: 8.1 Truelight Materials8.1.10 LineC
Page 206 and 207: 8.1 Truelight Materials8.1.13 Phong
Page 210 and 211: 8.1 Truelight Materials· Mirrored
Page 212 and 213: 8.1 Truelight Materialswill be rend
Page 214 and 215: 8.1 Truelight Materials· Mirrored
Page 216 and 217: 8.1 Truelight Materials8.1.15 Refle
Page 218 and 219: 8.1 Truelight Materials• Repeat U
Page 220 and 221: 8.1 Truelight Materials» Reflectiv
Page 222 and 223: 8.1 Truelight Materials» Bump Text
Page 224 and 225: 8.1 Truelight Materials• Solid: R
Page 226 and 227: 8.1 Truelight Materialsquality yiel
Page 228 and 229: 8.1 Truelight Materials» Contrast:
Page 230 and 231: 8.1 Truelight Materials8.1.19 Spher
Page 232 and 233: 8.1 Truelight Materials» Saturatio
Page 234 and 235: 8.1 Truelight Materials8.1.20 Switc
Page 236 and 237: 8.1 Truelight Materials» Reflectiv
Page 238 and 239: 8.1 Truelight Materials8.1.22 Tripl
Page 240 and 241: 8.1 Truelight Materials• Link Rep
Page 242 and 243: 8.1 Truelight Materials• Repeat M
Page 244 and 245: 8.1 Truelight Materials• Fast: Us
Page 246 and 247: 8.1 Truelight Materials» Use Textu
Page 248 and 249: 8.1 Truelight Materials• Link Rep
Page 250 and 251: 8.1 Truelight Materials» Cloth Pre
show all

6 modules - PI-VR GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?