6 modules - PI-VR GmbH

8.1 Truelight Materialswill be rendered.» Clearcoat Settings Sets the clearcoat color. The clearcoat is a transparent,strongly reflective paint layer on the base carbon layer.» Clearcoat Type: The Fresnel Term describes the intensity of a reflection basedon the viewing angle. Its intensity at normal incidence is set by the material’sreflectivity.• Off: Turns off the clearcoat.• Fast: Uses a fast but less accurate approximation to the Fresnel Term.• Accurate: Uses a physically accurate evaluation of the Fresnel Term.» Clearcoat color: Sets the clearcoat color.» Reflectivity: Sets the clearcoat reflective intensity.» Carbon Pattern Settings» Pattern type: There are several different pattern types, according to the carbonstructures usually sewed.• 2 X 2• 3 X 1 staircase• 3 X 1 interleave• 5 X 1» Pattern Size: Sets the carbon structure size.» Pattern intensity: Sets the fissure depth intensity.» Pattern orientation (Rotate x,y,z): Sets the pattern direction on x, y and z projectiondirection.» Bump Texture» Use Structure: Activates a procedural bump structure.185