Positron G-Series User Manual (PDF)

Positron Telecommunication Systems Inc. – G-Series Gateways User GuideCallerID Number:The CallerID number shown for the dial pattern.Group :Select from the drop-down menu, the Outgoing Line Groups whichwill use the created pattern.Strip Digits:Select from the drop-down menu, the number of digits you wish tostrip from the dialed number. In the example above, the user isasked to dial 9 to make a call; however, the 9 should be strippedbefore sending the call out.Prepend:This field allows the option to prepend digit(s) onto the dialednumber.Ring Time:Drop-down menu offers time (in seconds), for call response beforeit hangs up.If Failed:Drop-down menu offers a selection of messages to play back tothe caller if the call has failed.Patterns are executed in sequence, from top to bottom as they are listed in the WebInterface. For this reason, the rules will generally list the long patterns at the top, andshorter ones toward the bottom.NOTE: Rules are applied in order of rank, with the uppermost rulestaking precedence over the ones below. This can be controlled withthe Up/Down buttons.116VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299