Positron G-Series User Manual (PDF)

More documents

Recommendations

Info

Positron Telecommunication Systems Inc. – G-Series Gateways User GuideSystem -> Network -> SIP / RTP TabSIP External IP:If the Gateway is behind a NAT, and an attempt is made toconnect to a carrier, then enable/set External IP by clicking theGet External IP button.SIP Localnet:If another VPN (Virtual Private Network) or LAN (Local Areanetwork), is configured besides the network used with theGateway, and they are to be connected then enter that networkinformation in the SIP Localnet box.SIP BindPort:Allows changing the UDP port for SIP service from 5060 (default)to another port.RTP Ports:When the Gateway acts as a SIP server behind the NAT, externalclients, or external clients behind a second NAT require portforwarding on the router the Gateway is connected to. Theforwarded ports would have to match the port range configured inthis field.Default: 10000 - 2000052VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Positron Telecommunication Systems Inc. – G-Series Gateways User GuideSystem -> Network -> Services TabsshtftpSecure Shell or SSH is a network protocol that allows data to beexchanged using a secure channel between two networkeddevices. Secure Shell (ssh) is used to access the command lineinterface (CLI). The ssh service must be enabled before ssh canbe used with the Gateway.Default: RunningTrivial File Transfer Protocol (tftp) is a file transfer protocol knownfor its simplicity. When enabled, a G-Series Gateway can act as atftp server as some models of telephone sets can only beprovisioned using tftp.Default: Runningsnmpdsnmpd is an SNMP agent which binds to a port and awaitsrequests from SNMP management software. It can be used toprovide system information to a remote snmp server.Default: Stoppedastmanproxyastmanproxy is the proxy server for Asterisk's Manager Interface.It allows communication with multiple Asterisk boxes from a singlepoint of contact using a variety of I/O formats. Third partyapplications that work with Outlook, may use astmanproxy toconnect with the G-Series Gateway. Examples of the third partyapplications would be OutCALL and xtelsio.Default: Stopped53VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Page 6 and 7: Positron Telecommunication Systems
Page 102 and 103:
Positron Telecommunication Systems
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
show all

Positron G-Series User Manual (PDF)

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?