Positron G-Series User Manual (PDF)

Positron Telecommunication Systems Inc. – G-Series Gateways User GuideBlind Transfer:When the transfer is done through the PBX, user enters “#1” anddials extension, then hangs up. This is sometimes called coldtransfer or unattended transfer. The default value is #1Warm Transfer:When the transfer is done through the PBX, user enters “#2” anddials extension, talks to the called extension, then hangs up.Sometimes called attended transfer.Default: #2Pick-up:Identification of the pickup groups available on the system –comma separated.Default: #7Voicemail Extension:Extension to be used when system users call in for messages.Default: 6050.Remote Voicemail Extension:Extension to be used when system users call in for messagesfrom outside the network.'0' Extension (Voicemail):Extension to be dialed when a user of an IVR system dials 0.Default: 6005'*' Extension (Voicemail):Extension to be dialed when a user of an IVR system dials *.Default: 6051 (voicemail menu).IP Address Extension:Extension to be dialed when an administrator needs to find thenetwork IP address of the Gateway.‣ To retrieve the IP Address of a G-Series Gateway• Dial the IP Address ExtensionIf an IP Address Extension has not been set, then dial ##**• Enter the passwordDefault password: 1234567890#• The Gateway’s IP Address will be presented135VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299