Positron G-Series User Manual (PDF)

Positron Telecommunication Systems Inc. – G-Series Gateways User GuideThe Gateway Web InterfaceThe Web Interface is the main way to communicated with the G-Series Gateway units.‣ To connect to the Web Interface:NOTE: Throughout this document we will refer to the installer`scomputer as the notebook. Any computer with local file storage, awired Ethernet jack, and running a compatible browser can be used toconfigure the system.• Verify that the steps outlined in the Quick Start documentaccompanying the unit have all been performed and that theCircle LED on the G-Series Gateway is glowing steadily red.• Connect a notebook computer to Ethernet Port 1 on the G-Series Gateway using a standard Ethernet cable. If necessary,Ports 2 or 3 could also be used, or even a free port on anEthernet switch connected to the same network. In thisdocument we will consider the notebook to be connected toPort 1.Port 4 has special configuration abilities and should NOT be used forconnection to the notebook• Set the notebook’s Static IP address to any address other than192.168.1.2 . (For example: 192.168.1.200)• Use the notebook’s browser to accesshttp://192.168.1.2.9VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299