Subcontractors

AGREEMENT... THIS AGREEMENTi between("Buyer") and Parkson Corporation ("Seller").Buyer and Seller, in consideration of the mutual covenants set forth herein, agree as follows:ARTICLE 1 - GOODS AND SPECIAL SERVICES1.01 Seller shall furnish the Goods and Special Services as specified or indicated in the Contract Documents. The Goodsand Special Services to be furnished are described in Article 10 of this Agreement.ARTICLE 2 - THE PROJECT2.01 The Project for which the Goods and Special Services to be provided under the Contract Documents maybe the whole oronly a part is. generally described as follows: Athens North Oconee Water Reclamation FacilityARTICLE 3 - ENGINEER3.01 The Contract Documents for the Goods and Special Services have been prepared by Jordan, Jones and Goulding, Inc.who is hereinafter called Engineer and who is to assume all duties and responsibilities, and have the rights and authority assignedto Engineer in the Contract Documents in connection with the furnishing of Goods and Special Services. The Project wasdesigned by CH2MHiIl.ARTICLE 4 - POINT OF DESTINATION4.0 1The place where the Goods are to be delivered is defined in the General Conditions as the Point of Destination and isdesignated as: Athens North Oconee Water Reclamation Facility, 650 Bailey Street, Athens, GA 30605.ARTICLE 5 - CONTRACT TIMES5.01 TYme of the EssenceA. All time limits for Milestones, if any, the delivery of Goods and the furnishing of Special Services as stated in theContract Documents are of the essence of the Contract.5.02 Days for Submittal of Shop DrawingsA. All Shop Drawings and Samples required by the Contract Documents shall be submitted to Buyer for Buyer's and forEngineer's review and approval within 75 days after the date when the Contract Times commence to run as provided in Paragraph2.03 of the General Conditions.B. Within 21 days of receipt from the Seller,1. Buyer shall review, approve and forward the Shop Drawings to the Engineer for review, or2. Buyer shall review, disapprove and return the Shop Drawings to the Seller for resubmittal.C. Buyer shall return Shop Drawings to the Seller within 7 days of receipt of reviewed Shop Drawings from the Engineer.D. The time stated in paragraph 5.02.A. shall be the cumulative amount of time allowed the Seller for the preparation ofapprovable shop drawings,, as a part of the initial submittal preparation plus resubmittal preparations, if any.EJCDC P-520 Form of Agreement Between Buyer and Seller for Procurement ContractsCopyright 02000, National Society of Professional Engineers. All rights reserved.00520-202001-158 Rotary Drum Thickeners