Subcontractors

floor or grade."16. Page 44 42 56.03, Supplement 1-3, W-3 Pump data sheet, change Motor Speed to1800 rpm.17. Page 44 42 56.12, following Supplement 1-2, add attached motor data sheet asSupplement 2.18. Page 44 45 16.02-8, Article 2.06, Paragraph A,Change,"Alternatively, glass filled polypropylene will be considered"To"Alternatively, supports shall be fabricated from minimum 1inch rod and shall be mounted to the floor with a singleanchor bolt."Drawings1. Drawing 05-CS-10, Details 1 and 2,dimension of Stainless Steel Checkered Plate,Change, "3/8"' To "1/4""2. Drawing 05-CG-22, following Note 2., add:3. BLASTING SHALL BE PERFORMED ACCORDING TO STANDARDS SETBY ATHENS-CLARKE CO., THE U.S. CORP OF ENGINEERS (USCOE),GA EPD, AND ANY AUTHORITY HAVING JURISDICTION. SEDIMENTCONTROL SHALL BE PROVIDED AS REQUIRED BY THE BUFFERVARIANCE DOCUMENTS ISSUED BY USCOE AND/OR GA EPD.This Addendum modifies, adds to, and is hereby part of Bid #00280.conditions remain unchanged.All other terms andAny inquiries concerning this Invitation to Bid should be made to Julie Ann Donahue, CPPB,Purchasing Administrator or Toro Holt, Senior Buyer, (706) 613-3068, fax (706) 613-1975 oremail toroholt@co.clarke.ga.us.The Unified Government of Athens-Clarke County reserves the right to reject any and all bids,to waive any technicalities or irregularities and to award the bid based on the highest and bestinterest of the Unified Government of Athens-Clarke County.#00280 Addendum 9 BtD.doc Page 7 of 7