Subcontractors

Weir Specialty PumpsP.O. Box209 (8411O209) Tet 801-359-8731 W GMCO PUM P44440WWestftD Souith FDR801T30-7Salt take City, UT 84101 www.wehspcom W EMC HIDROSTALISO MI4ROTO'JET PUMPMay 12, 2008' ' " PROPOSALSUBJECT:WEMCO PUMPSJOB: ATHENS, GA - NORTH OCONEEPROPOSAL NO. 61050Thank you: for your request for quotation on WEMCO equipment. We are pleased to offer WEMCOpumping equipment for conditions of service as described below:INFLUENT PUMPS 1-5Section 44 42 56.04Conditions of Service: 5210/ 6650 GPM against 154/134' TDHFive (5) 12" X 10" MODEL I10K-S-IETZ6 WEMCO-Hidrostal Screw CentrifugalpumpsWetted parts of cast iron with high chrome iron suction liner and impeller. The pump isdirectly connected to the shaft of the immersible motor. The pumps are supported by agalvanized steel base elbow, with a non-sparking fast-out device to allow removal of thepumps without the need to enter the wet well. The pumps are furnished with a stainlesssteel lifting chain and grip eye system. The pumps are furnished with a Hidrostal tandemmechanical seal running in an oil bath.FiveFiveTenOneOne(5) 305.6 HP, 3 Phase, 60 Hertz, 460 Volt, 1200 RPM, standard efficiency immersiblemotors. The motors are fumished with 100 feet of power and shielded control cable.(5) 120 volt moisture detector relays.(10) Steel intermediate guide rail brackets (two per pump).(1) Set of variable speed, 5-point performance tests.(1) Set of spare mechanical seals.* Startup included in quoted price and to be completed by Principle Environmental, our localauthorized representative.PRICE: $797,445APPROX. TOTAL WEIGHT: 27,500 Lbs.isz="dr