SERIES

Cables and Peripheral Devices
Cables for SGM7P Rotary Servomotors
Encoder Cables of 20 m or Less
Servomotor
Model
Name
Length
(L)
Order Number
Flexible
Standard Cable
Cable *1*2
Appearance
SGM7P-01, -02
and -04
100 W, 200 W,
400 W
For incremental
encoder
3 m JZSP-C7PI0D-03-E JZSP-C7PI2D-03-E
5 m JZSP-C7PI0D-05-E JZSP-C7PI2D-05-E
10 m JZSP-C7PI0D-10-E JZSP-C7PI2D-10-E
15 m JZSP-C7PI0D-15-E JZSP-C7PI2D-15-E
20 m JZSP-C7PI0D-20-E JZSP-C7PI2D-20-E
Encoder end
L
SERVOPACK
end
SGM7P-08
and -15
750 W, 1500 W
Cable installed
toward load
3 m JZSP-CMP00-03-E JZSP-CMP10-03-E
5 m JZSP-CMP00-05-E JZSP-CMP10-05-E
10 m JZSP-CMP00-10-E JZSP-CMP10-10-E
15 m JZSP-CMP00-15-E JZSP-CMP10-15-E
Encoder end
L
SERVOPACK end
20 m JZSP-CMP00-20-E JZSP-CMP10-20-E
3 m JZSP-C7PA0D-03-E JZSP-C7PA2D-03-E
SGM7P-01, -02
and -04
100 W, 200 W,
400 W
For absolute
encoder: With
Battery Case *3
5 m JZSP-C7PA0D-05-E JZSP-C7PA2D-05-E
10 m JZSP-C7PA0D-10-E JZSP-C7PA2D-10-E
15 m JZSP-C7PA0D-15-E JZSP-C7PA2D-15-E
20 m JZSP-C7PA0D-20-E JZSP-C7PA2D-20-E
SERVOPACK
end
L
Battery Case
(battery included)
Encoder end
SGM7P-08
and -15
750 W, 1500 W
Cable installed
toward load
3 m JZSP-CSP19-03-E JZSP-CSP29-03-E
5 m JZSP-CSP19-05-E JZSP-CSP29-05-E
10 m JZSP-CSP19-10-E JZSP-CSP29-10-E
15 m JZSP-CSP19-15-E JZSP-CSP29-15-E
Encoder end
L
SERVOPACK end
20 m JZSP-CSP19-20-E JZSP-CSP29-20-E
*1. Use Flexible Cables for moving parts of machines, such as robots.
*2. The recommended bending radius (R) is 90 mm or larger.
*3. If a battery is connected to the host controller, the Battery Case is not required. If so, use a cable for incremental
encoders.
Relay Encoder Cables of 30 m to 50 m
Servomotor
Model
Name
Length
(L)
Order Number
Appearance
Encoder-end Cable
(for incremental or absolute
encoder)
Cable installed toward load
0.3 m JZSP-C7PRCD-E
Encoder end
L
SERVOPACK end
All SGM7P models
Cables with Connectors on
Both Ends
(for incremental or absolute
encoder)
30 m JZSP-UCMP00-30-E
40 m JZSP-UCMP00-40-E
50 m JZSP-UCMP00-50-E
SERVOPACK end
L
Encoder end
Cable with a Battery Case
(Required when an absolute
encoder is used.*)
0.3 m JZSP-CSP12-E
SERVOPACK end
L
Battery Case
(battery included)
Encoder end
* This Cable is not required if a battery is connected to the host controller.
380