AIR CIRCUIT BREAKERS - Electrical and Electronics Division

15
15/37
RITT RITTAL RITT AL TC TC RA RACK RA CK
For individual applications in telecommunications.
In conjunction with metric (535 mm) mounting angles, the base frame of the telecommunication rack meets the
requirements of ETSIstandard ETS 300 119-3. The basic system consists of four torsionally stiff aluminium
sections, and a base frame and roof frame of sheet steel which are screw-fixed to one another in an electrically
conductive manner.
Two mounting systems can be integrated simultaneously into the TC Rack. 482.6 mm (19") mounting angles can
be combined with metric (535 mm) mounting angles. Retrospective conversion to a different mounting system or
a combination of different systems is no problem.
ETSI standard ETS 300 119-3
Torsionally stiff aluminium sections
For 482.6 mm (19") and/or metric installed equipment
Model Model No. No. DK DK DK
7723.035 7723.035 7726.035
7726.035
U 46 46
SU 82 82
Width mm 600 600
Height mm 2200 2200
Depth mm 300 600
SMALL SMALL FM FM DISTRIB DISTRIBUT
DISTRIB UT UTORS UT ORS
Small FM distributors as corridor distributors and intermediate distributors are suitable for accommodating LSA
connection and distributor systems.
The two-part enclosure offers optimum access when installing your telecommunications wiring.
Shunting rings for routing telecommunications cables
Strain relief via comb rails
Wall section for LSA cable retainers or mounting troughs
Model Model No. No. No. DK DK
7052.035 7052.035 7053.035 7053.035 7054.035 7054.035 7055.035
7055.035
Paired wires 100 200 400 800
Width mm 300 500 500 900
Height mm 500 500 700 700
Depth mm 120 120 120 120