2018 Adhesives and Sealants Equipment Guide

1-84 | Melters
VersaBlue ® XN and XC Series
Adhesive Melters
Specifications - VersaBlue XN
Parameter Single 50 Single 100 Single 200
Number of tanks 1 1 1
Tank volume L (in 3 )
50 (3051) 100 (6102) 200 (12,205)
with extended hopper L (in 3 )
75 (4577) 150 (9154) 300 (18,307)
Holding capacity kg (lb)
47.5 (105) 95 (209) 190 (419)
with extended hopper kg (lb)
71.3 (157) 142.5 (314) 285 (628)
Melt rate kg/hr (lb/hr) 50 (110) 100 (220) 200 (440)
Throughput kg/hr (lb/hr) 75 (165) 125 (364) 250 (551)
Pump speed (rev/min):
Minimum speed
Maximum speed
5
80
Max. number of pumps:
Single stream
4 8
Dual stream
3 4 8
Motor size (W) 250
Maximum number of motors 4 8
Maximum hose/applicator capacity 18 26
Maximum hose/applicator power (W):
each hose or applicator
each hose/applicator pair
total power available for H/G
2000
4000
46000
Maximum external drive controls(1) 6
Maximum external (analog) pressure inputs 8 16
Maximum external (digital) pressure inputs 12
Maximum air run-up control channels 16
Maximum melter power (W) 58100 68700 82900
Electrical service 50/60 Hz (V)
3/PE AC 200-240
3/N/PE AC 380-415 Y
Control system
Service envelope: W x H x D mm (in.)
Rockwell ControlLogix Siemens S7
Filter area (cm 2 ) (in 2 ) 103
Melter dimensions: W x H x D mm (in.)
1460 x 2015 x 1250 1460 x 2015 x 1500
(57.5 x 79.3 x 49.2) (57.5 x 79.3 x 59)
1932 x 2244 x 1885
(76.1 x 88.3 x 74.2)
2182 x 2244 x 2135
(85.9 x 88.3 x 84.1)
1460 x 2015 x 2400
(57.5 x 79.3 x 94.5)
2182 x 2244 x 3035
(85.9 x 88.3 x 119.5)
Weight, empty kg (lb) 620 (1366.9) 820 (1807.8) 1470 (3240.8)
Ambient temperature range
0-50°C (32-122°F)
Operating temperature range
40-230°C (104-450°F)
Viscosity range (cps) 1,000 to 50,000
Maximum hydraulic pressure
85 bar/8.5 MPa
Approvals
CE
Enclosure rating IP 54
(1)
Melters can utilize unused internal motor controls for additional external drive controls.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com