2018 Adhesives and Sealants Equipment Guide

1-66 | Melters
VersaBlue ® Plus Series Adhesive Melters
Models 25, 50, and 100 Liter
Specifications
Parameter
Configuration VB/VW VC/VX VD/VY VE/VZ
Reservoir type
Pump type
V25
Release-coated grid and reservoir
Spur gear pump with variable AC motor
Tank volume L (in 3 ) 25 (1526)
Holding capacity kg (lb) 23.8 (53.4)
Pump rate kg/hr (lb/hr) 1 & 2 1.4 to 82.1 (3 to 181)
Filter type
Saturn ® basket-style filter
Melt rate kg/hr (lb/hr) 25 (55)
Throughput kg/hr (lb/hr) 37 (81.4)
Max. hydraulic pressure
Max. number of pumps
85 bar/ 8.5 MPa (1230 psi)
Up to 4 single stream OR 4 dual stream
Number of hose/applicator capacity 2, 4, 6, or 8
Maximum system power capacity:
2 hoses/applicators
4 hoses/applicators
6 hoses/applicators
8 hoses/applicators
10280 watts
13880 watts
17480 watts
21080 watts
Electrical service 4 50/60 Hz (V)
3/PE AC 200 5
3/PE AC 200-240
3/N/PE AC 380-415 Y
3/PE AC 400 5
3/PE AC 480 5
Input/Output capability
TruFlow control
Closed-loop pattern control
Module response monitoring
External metering devices
Maximum pressure sensors 6
Melter dimensions W x H x D mm (in.)
Installation dimensions W x H x D mm (in.)
9 outputs/13 inputs
Up to 4 channels
Up to 8 channels
Up to 32 channels
Up to 4 combined internal & external controllers
8 internal
1100 x 1382 x 1035 (43.3 x 54.4 x 40.8)
2699 x 1205 x 1281 106.3 x 61.6 x 50.4)
Weight 3 , empty kg (lb) 265 (584)
Ambient temperature range
Operating temperature range
Temperature control stability
0 to 40 °C (32 to 104 °F)
40 to 230 °C (100 to 450 °F)
± 1 °C (2 °F)
Enclosure rating IP 54
Approvals
CE, UL
(1)
Actual rates will vary depending on adhesive type, application parameters
and input voltage.
(2)
Range given is for maximum pump rate of various pumps available.
(3)
Weight depends on melter configuraton.
(4)
Permitted deviation from rated line voltage is ± 10%.
(5)
With integrated transformer, use 240V applicators and hoses.
(6) Up to 8 external sensors optional.
Casters optional, PROFIBUS, PROFINET, ControlNet and Ethernet I/P
optional.
PROFIBUS and PROFINET are registered trademarks of PROFIBUS &
PROFINET International.
ControlNet and ControlLogix are registered trademarks of Rockwell
Automation., Inc.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com