2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-23
MiniBlue ® II Applicator
Box
7
Box
8
Top Service
Cordset Position
Description
Left Side (configurable applicators only)
Right Side (configurable applicators only)
Left Back (configurable applicators only)
Right Back (configurable applicators only)
SP (Saturn Platinum)
Solenoid Valve Type
Description
Code
TS
LS
RS
LB
RB
Code
SP
SD MiniMac, Line Speeds, 90 m/min
(295 ft/min) SD
SG (Saturn) 24 VDC, Rev. Function
SG
Box
9
Saturn Inline Filters
Description
50-Mesh, Straight
50-Mesh, 45° Angle
50-Mesh, 90° Angle
100-Mesh, Straight
100-Mesh, 45° Angle
100-Mesh, 90° Angle
200-Mesh, Straight
200-Mesh, 45° Angle
200-Mesh, 90° Angle
On slim single-module applicators, the
hose connector is located just above the
integrated filter. On single- or multimodule
configurable applicators, the filter
is inline with the hose connector.
Code
E0
E4
E9
F0
F4
F9
G0
G4
G9
SD solenoid valves may not be used in
common air applicator configurations.
If the production line speed is 90 m/min
(295 ft/min) or less, any solenoid valves
may be used. If the production line speed
is greater than 90 m/min (295 ft/min),
only SP solenoid valves may be used.
Box
10
Number of Hydraulic Ports
Description
Code
One Hose Port Centered On Back. 1
One Hose Port On Each End And One
Centered On Back.
3
One Hose Port On Each End And Three On
Back (one in the center and one at each end) 5
Box
11
Cover
Description
Code
No Cover 000
Soft Cover 010
Box
12
Manifold Style
Description
Code
Standard MiniBlue 000
Mounts In Same Location As Best Choice
Air-Close Applicator
BCA
Mounts In Same Location As Best Choice
Spring-Close Applicator
BCS
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com