2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Extruder Systems | 6-5
EEX Extruder Systems
Box
13
Hopper Level Sensor
Box
17
Casters
Box
14
Description
Code
No level sensor
X
1 Level sensor (Hopper empty) 1
2 LS (Hopper empty + Hopper low
level)
3 LS (Hopper empty + Hopper low
level + Hopper full)
Standby Temperature - Setback
2
3
Box
18
Description
No casters, just feet
With casters
Protection Frame for Sensors
Description
No protection frame
With protection frame
Code
X
M
Code
X
Q
Box
15
Description
No Standby/setback
Standby / Setback Option*
Week/Day Timer
Description
No Week/Day timer
With Week/Day timer*
Code
X
T
Code
X
W
Box
19
Additional Electrical Hose/
Applicator Connectors*
Description
Code
No add. H/A connector
X
One add. H/A connector 1
Two add. H/A connectors 2
Three add. H/A connectors 3
Four add. H/A connectors
(not for EEX 200)
4
*For automatic startup and shutdown of the
extruder.
*Maximum number of connections depends on
Pump Station, refer to table below.
Box
16
Hopper Protection Grid
Description
Code
No prot. grid(when AutoFill)
X
With protective grid*
G
*Mandatory if hopper is filled manually.
Box
23
Special Request
Description
No Special Request
Any special need to be specified and
quoted upon request
Code
X
T
Pump Station Table
Standard
Number of Hose/
Applicators
Additional Electrical Hose/Applicator
Connectors
Code Box 3
Description
EEX10
EEX40
EEX100 EEX200
0 No Pump station (pressure controlled) 1 4 4 3
1 Single pump station (1 pump) 1 4 3 3
2
Single pump station with re-circulating
ports (1 out/1 in)*
2 3 2 2
3 Double pump station (2 pumps) 2 3 2 1
4
Double pump station with re-circulating
ports (2 out/2 in)*
4 1
5 Quadruple pump station (4 pumps) 4
*Only in combination with a re-circulating applicator.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com