2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Melters | 1-29
Web Content
ProBlue ® and ProBlue Liberty ATS Melters
Melters and Melter/Fill Systems with Adhesive Process Control
ProBlue ATS Melters
Combine simple operation with an adhesive
tracking system (ATS) to maximize uptime,
optimize adhesive consumption and improve
production efficiency.
Primary Features
• Installation is quick and easy. Compact size and
a patented, centrally located manifold that allows
hoses to run right or left means ProBlue melters
fit on virtually any packaging line.
• Quick-disconnect power and I/O plugs and
a patented, quick-release base design further
simplify set up.
• Plug-in modules let you add or subtract hoses
and applicators to meet changing production
needs.
• A disposable filter eliminates the need for routine
filter flushing while helping prevent debris and
contaminants in adhesive from reaching your
products.
• An integrated precision gear flow meter directly
measures adhesive volume, and the system
output signal can be used to stop the line, eject
product or signal a light tower.
• Maintain the proper adhesive deposit on each
and every package to increase production
efficiency and quality.
• Track total adhesive consumption, per package
add-on weight, total number of products and
out-of-tolerance products.
• Operator safety is improved with a patented
automatic pressure discharge (APD) valve that
relieves pressure into the melter tank in seconds.
• Reduce costs by identifying adhesive and
product waste.
• Monitor and control in real time via optional
Ethernet IP & Fieldbus; download historical
data via USB
• User adjustable adhesive volume upper and
lower tolerance band limits to identify out-oftolerance
produc
ProBlue® ATS Melters
4, 7 and 10 Liter Melters with Adhesive
Process Control
ProBlue Liberty ATS Melters
A consolidated tankless melter and fill system maintains consistent
adhesive levels, increasing uptime while delivering energy and
maintenance savings that result in increased operating efficiency
and lower per-package costs.
A sensor in the reservoir monitors molten adhesive levels in the
hopper and alerts the system when adhesive is needed. The closed
system helps maintain adhesive bond strength by minimizing
degradation that comes from prolonged thermal exposure,
temperature variation and exposure to contaminants.
An integrated precision gear flow meter directly measures adhesive
volume and alerts the system when the amount of adhesive is out of
a pre-determined band. The output signal can be used to stop the
line, eject product or signal a light tower. By tracking the precise
amount of adhesive dispensed onto a package, users can minimize
adhesive waste and prevent pop-opens.
Primary Features
• Track total adhesive consumption, per package add-on weight and total
number of products
• Download historical data via USB for process analysis
ProBlue Liberty ATS
Integrated Tankless Melter and Fill
System with Adhesive Process Control
• Hopper lid allows for easy access and sealed design maintains adhesive purity
by protecting from plant debris
• Automatic pressure discharge valve relieves pressure into melter in seconds
• Service, maintenance and daily operation can be performed from one side of
the melter
• Real-time monitoring and control via optional Ethernet IP & Fieldbus
• User adjustable adhesive volume upper and lower tolerance band limits to
identify out of tolerance product
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com