2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Controls | 13-45
e driver
Description
The e driver is a high-performance, current-controlling,
single-channel electric applicator driver designed for use
with an e.dot electric applicator. The e driver controls
coil current, which is the driving force behind the
actuation of the dispensing module on the applicator.
The driver’s electrical output is a spiked waveform
that applies a high-peak current to actuate the module
rapidly, followed by a lower holding current to reduce
power dissipation.
• Fully programmable: spike and hold current, spike time
• Two operating modes: normal and dot
• Troubleshooting indicators: power, trigger, output and thermal
fault LEDs
e driver
Parts and Accessories
Part Number
Description
1043759 e driver, Single Box
1041830 Cable, 15 m (49.2 ft), e.dot+ Hose to e driver
1041835 Cable, 10 m (32.8 ft), e.dot+ Hose to LogiComm/e driver
1041831 Cable Extension, e.dot+ Hose to P/N 1041830 or P/N 1041835, 10 m (33 ft)
1018155 Kit, Driver Programming
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com