2018 Adhesives and Sealants Equipment Guide

9-2 | Hand-Held Applicators
Series AD-41 Hand-Held Applicators
Specifications
Operating temperature range
Parameter
Working hydraulic pressure MPa (psi)
Air pressure (1) MPa (psi)
Swirl
Wide pattern swirl
Specification
55–230 °C (130–450 °F)
10.34 (1,500) maximum
0–0.1 (0–15)
0.03–0.55 (5–80)
Air consumption (2)
Swirl MPa (psi)
Wide pattern swirl MPa (psi)
Extrusion nozzle orifice diameters (3) mm (in.)
Standard
1.2 scfm maximum
2.5 scfm maximum
0.51, 0.76, 1.02, 1.27, 1.52, 2.29
(0.020, 0.030, 0.040, 0.050, 0.060, 0.090)
1.07, 1.55, 2.29, 3.30 (0.042, 0.061, 0.090, 0.130)
Extended
1.57, 2.36, 3.18, 3.96 (0.062, 0.093, 0.125, 0.156)
Extended for AD-41 LBS
Swirl
0.64, 0.76, 1.17 (0.025, 0.030, 0.046)
Spray pattern width mm (in.)
6–38 (0.25–1.5)
Swirl (3)
38–152 (1.5–6.0)
Wide-pattern spray (4)
Electrical service
240 VAC, 50/60 Hz
120 VAC, 50/60 Hz
200 VAC, 50/60 Hz
Melter compatibility
PA-2510, Series 3000V, 3000 and 2300, DuraBlue
240 VAC
PA-2510, DuraBlue
120 VAC (5)
Hose compatibility
240 VAC
120 VAC
AD-41 240V hoses
AD-41 120V hoses
Weight kg (lb) 0.64 (1.4)
(1)
Recommended range.
(2)
Includes operating and spray air requirements for AD-41 hand-held applicators with swirl or spray pattern adapters.
(3)
Order and purchase nozzles separately.
(4)
Pattern adapter for wide pattern spray is complete. It does not require a separate nozzle purchase.
(5)
120V Melters require 30 amps. Consult a Nordson representative to ensure that the system configuration does not exceed the available
wattage.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com