2018 Adhesives and Sealants Equipment Guide

Adhesive & Sealants Equipment Guide
Automatic Applicators | 7-45
Web Content
Description
The PatternPro applicator features a rotating disk design,
which allows you to rotate the modules on the applicator
body, easily creating new patterns and dramatically
reducing downtime during product changeover.
A series of O-rings and separate air and hydraulic
passages allow the disk and applicator module to pivot
on their axes while adhesive and air flow uninterrupted
to the modules.
A small work envelope allows the PatternPro applicator
to fit into tight parent machine constraints, where
standard multi-module applicators will not.
PatternPro Variable Pitch
Dispensing Applicator
PatternPro applicators are available with reliable Nordson
air-open/spring-close SolidBlue S Series modules. Special
applicators can be ordered for use with MiniBlue II (BAS
or SB), ClassicBlue zero cavity or SureBead S reduced
cavity modules.
Closer bead-to-bead positioning permits more flexibility
than stacked module applicators. Bead repositioning can
be accomplished without moving the entire applicator.
PatternPro Applicator
Features
• Provides close bead-to-bead spacing.
• Speed pattern changes during product changeover reducing
downtime.
• A variety of modules are available for use to address different
applications.
• Unique rotating disk design allows modules to pivot without
adhesive leakage.
• Standard 40 mm (1.58 in.) and 70 mm (2.76 in.) module pitch
applicators cover most traymaking, cartoning and wrap-around
carton sealing applications.
This is a configurable product. Contact your Nordson
representative for additional information.
To place your order, NAD call 1-888-NORDSON (1-888-667-3766), fax 1-770-497-3733 or online at www.enordson.com.
International Orders, call 1-440-985-4797, fax 1-440-985-1096, or email intcustomerservice@nordson.com